Back from the Shop...

Please check the FAQ (https://www.xyplorer.com/faq.php) before posting a question...
nas8e9
Posts: 2232
Joined: 21 Jun 2008 14:50

Re: Back from the Shop...

Post by nas8e9 »

admin wrote:Ha, I had asked the man from the shop exactly that and he said it would work. Well, I proved him wrong in that 2 + 1 did not work, but with the shop man's incompetence proven I now see a good chance for your theory. Worth a try (and I will force them to take it back if it does not work...).

BTW, my old RAM was: 1GB DDR2 Aeneon PC5400 (3 years old)
So some asymmetry works, obviously. I'd get two of the Kingston module I linked to earlier (Kingston ValueRAM as opposed to their other lines, is meant to be the gold standard in compatibility), preceded by a BIOS flash. If you need any pointers regarding flashing, do let me know (as you can probably tell, I'm having a slow Monday... 8)).

admin
Site Admin
Posts: 67248
Joined: 22 May 2004 16:48
Location: Win8.1, Win10, Win11, all @100%
Contact:

Re: Back from the Shop...

Post by admin »

nas8e9 wrote:
admin wrote:Ha, I had asked the man from the shop exactly that and he said it would work. Well, I proved him wrong in that 2 + 1 did not work, but with the shop man's incompetence proven I now see a good chance for your theory. Worth a try (and I will force them to take it back if it does not work...).

BTW, my old RAM was: 1GB DDR2 Aeneon PC5400 (3 years old)
So some asymmetry works, obviously. I'd get two of the Kingston module I linked to earlier (Kingston ValueRAM as opposed to their other lines, is meant to be the gold standard in compatibility), preceded by a BIOS flash. If you need any pointers regarding flashing, do let me know (as you can probably tell, I'm having a slow Monday... 8)).
So, one more 2GB RAM DDR2 Kingston Valueram PC800/6400 should do, right?

Yes, I could need some pointers regarding flashing...

nas8e9
Posts: 2232
Joined: 21 Jun 2008 14:50

Re: Back from the Shop...

Post by nas8e9 »

admin wrote:So, one more 2GB RAM DDR2 Kingston Valueram PC800/6400 should do, right?

Yes, I could need some pointers regarding flashing...
I'm not entirely sure: Kingston's web site lists these as compatible:

2 GB sticks (1 x 2 GB):

KVR667D2N5/2G: 2GB 667MHz DDR2 Non-ECC CL5 DIMM
KVR800D2N6/2G: 2GB 800MHz DDR2 Non-ECC CL6 DIMM

4 GB kits (2 x 2GB):

KVR667D2N5K2/4G: 4GB 667MHz DDR2 Non-ECC CL5 DIMM (Kit of 2);
KVR800D2N6K2/4G: 4GB 800MHz DDR2 Non-ECC CL6 DIMM (Kit of 2).

Based on Atelco's web site, you probably have KVR800D2N 5 /2G rather than KVR800D2N 6 /2G. At this point, I'd go for the exclusively literal route: of the above list, they only store KVR667D2N5/2G (single 2 GB stick).

I need to get back to you with regard to MSI's BIOS flashing.

zer0
Posts: 2676
Joined: 19 Jan 2009 20:11

Re: Back from the Shop...

Post by zer0 »

nas8e9 wrote:I need to get back to you with regard to MSI's BIOS flashing.
Or I can take the relay stick for a while :P

MSI's Live Update utility is your tool of choice (Clicky here!). You can flash directly from Windows, which is definitely easier than booting off a storage medium (floppy etc). The tool will detect your BIOS version, will download the latest available and will flash over the existing one. You should have no hiccups with this straightforward process :)
Last edited by zer0 on 10 May 2010 15:39, edited 1 time in total.
Reporting a bug? Have a wish? Got a question? Use search - View roadmap - FAQs: Forum + XY site
Windows 7/10
Always using the latest stable two-decimal build

admin
Site Admin
Posts: 67248
Joined: 22 May 2004 16:48
Location: Win8.1, Win10, Win11, all @100%
Contact:

Re: Back from the Shop...

Post by admin »

nas8e9 wrote:
admin wrote:So, one more 2GB RAM DDR2 Kingston Valueram PC800/6400 should do, right?

Yes, I could need some pointers regarding flashing...
I'm not entirely sure: Kingston's web site lists these as compatible:

2 GB sticks (1 x 2 GB):

KVR667D2N5/2G: 2GB 667MHz DDR2 Non-ECC CL5 DIMM
KVR800D2N6/2G: 2GB 800MHz DDR2 Non-ECC CL6 DIMM

4 GB kits (2 x 2GB):

KVR667D2N5K2/4G: 4GB 667MHz DDR2 Non-ECC CL5 DIMM (Kit of 2);
KVR800D2N6K2/4G: 4GB 800MHz DDR2 Non-ECC CL6 DIMM (Kit of 2).

Based on Atelco's web site, you probably have KVR800D2N 5 /2G rather than KVR800D2N 6 /2G. At this point, I'd go for the exclusively literal route: of the above list, they only store KVR667D2N5/2G (single 2 GB stick).

I need to get back to you with regard to MSI's BIOS flashing.
I got the details from the bill, maybe they made a mistake. I will have to turn off the machine and take the RAM module out in order to read the label. And I have to do some (non-digital) shopping. See you later... :)

nas8e9
Posts: 2232
Joined: 21 Jun 2008 14:50

Re: Back from the Shop...

Post by nas8e9 »

zer0 wrote:Or I can take the relay stick for a while :P

MSI's Live Update utility is your tool of choice. You can flash directly from Windows, which is definitely easier than booting off a storage medium (floppy etc). The tool will detect your BIOS version, will download the latest available and will flash over the existing one. You should have no hiccups with this straightforward process :)
Yes, with caveats:
1. disable all security software except your firewall;
2. close all running programs, including what lurks in the notification area;
3. you covered backups, didn't you?

The BIOS page is here, with the LiveUpdate option at the bottom of the page. I'd go for the traditional Live Update 3 installing version (the right button).

Edited to add: Please note that BIOS flashing *is* risky (I bricked a Gigabyte MB myself earlier this year). Given your memory situation, I don't think you have much choice but if you'd suffer major disruption/losses etc. when losing your main PC, I'd get a backup plan/PC/laptop before doing the above.

admin
Site Admin
Posts: 67248
Joined: 22 May 2004 16:48
Location: Win8.1, Win10, Win11, all @100%
Contact:

Re: Back from the Shop...

Post by admin »

I have KVR800D2N6/2G.

The flashing indeed sounds too risky for me now. Do you think it's worth to try whether a second KVR800D2N6/2G will work without flashing?

nas8e9
Posts: 2232
Joined: 21 Jun 2008 14:50

Re: Back from the Shop...

Post by nas8e9 »

admin wrote:I have KVR800D2N6/2G.

The flashing indeed sounds too risky for me now. Do you think it's worth to try whether a second KVR800D2N6/2G will work without flashing?
I'd try it. Going by the BIOS change log, they didn't add specific support for more than 2 GB of RAM. OTOH, BIOS change logs aren't always as complete as XYplorer's :). No harm no foul.

admin
Site Admin
Posts: 67248
Joined: 22 May 2004 16:48
Location: Win8.1, Win10, Win11, all @100%
Contact:

Re: Back from the Shop...

Post by admin »

nas8e9 wrote:
admin wrote:I have KVR800D2N6/2G.

The flashing indeed sounds too risky for me now. Do you think it's worth to try whether a second KVR800D2N6/2G will work without flashing?
I'd try it. Going by the BIOS change log, they didn't add specific support for more than 2 GB of RAM. OTOH, BIOS change logs aren't always as complete as XYplorer's :). No harm no foul.
Yep, I'll try that tomorrow. I have 2 banks, and currently one 2GB stick in one of them, so it can handle 2GB sticks. Why shouldn't it take another 2GB stick?

zer0
Posts: 2676
Joined: 19 Jan 2009 20:11

Re: Back from the Shop...

Post by zer0 »

admin wrote:Yep, I'll try that tomorrow. I have 2 banks, and currently one 2GB stick in one of them, so it can handle 2GB sticks. Why shouldn't it take another 2GB stick?
If only there was a :shiftyeyes: emoticon available, I'd use it in this situation. The information that MSI provide doesn't add up. The manual says it's 2GB max. Let's assume that this is max amount/stick allowed by each of its memory banks. However, on the overview tab, MSI say "Supports a maximum memory size up to 8GB". How can one create a memory array that amounts to 8GB with 2 banks that each support 2GB maximum? They didn't teach that in school :mrgreen:
Reporting a bug? Have a wish? Got a question? Use search - View roadmap - FAQs: Forum + XY site
Windows 7/10
Always using the latest stable two-decimal build

nas8e9
Posts: 2232
Joined: 21 Jun 2008 14:50

Re: Back from the Shop...

Post by nas8e9 »

zer0 wrote:If only there was a :shiftyeyes: emoticon available, I'd use it in this situation. The information that MSI provide doesn't add up. The manual says it's 2GB max. Let's assume that this is max amount/stick allowed by each of its memory banks. However, on the overview tab, MSI say "Supports a maximum memory size up to 8GB". How can one create a memory array that amounts to 8GB with 2 banks that each support 2GB maximum? They didn't teach that in school :mrgreen:
I'm not very happy that I gave Don inaccurate information earlier, but I'm inclined to blame mostly MSI for this :evil:. I *think* that in 2006 when this board was introduced, DDR2 RAM modules with capacities greater than 1 GB were unavailable or at least exotic. As time went by, higher capacities became available without all sources of information (I consulted Newegg.com and the manual) being updated to reflect that.

admin
Site Admin
Posts: 67248
Joined: 22 May 2004 16:48
Location: Win8.1, Win10, Win11, all @100%
Contact:

Re: Back from the Shop...

Post by admin »

zer0 wrote:
admin wrote:Yep, I'll try that tomorrow. I have 2 banks, and currently one 2GB stick in one of them, so it can handle 2GB sticks. Why shouldn't it take another 2GB stick?
If only there was a :shiftyeyes: emoticon available, I'd use it in this situation. The information that MSI provide doesn't add up. The manual says it's 2GB max. Let's assume that this is max amount/stick allowed by each of its memory banks. However, on the overview tab, MSI say "Supports a maximum memory size up to 8GB". How can one create a memory array that amounts to 8GB with 2 banks that each support 2GB maximum? They didn't teach that in school :mrgreen:
Googling for MSI K9N6SGM-V max ram I found several sites that state 4GB -- swarm intelligence at work I hope.

nas8e9
Posts: 2232
Joined: 21 Jun 2008 14:50

Re: Back from the Shop...

Post by nas8e9 »

admin wrote:Googling for MSI K9N6SGM-V max ram I found several sites that state 4GB -- swarm intelligence at work I hope.
I went for the full spec sheet, which may be more thorough but in this case not as accurate... :cry:

zer0
Posts: 2676
Joined: 19 Jan 2009 20:11

Re: Back from the Shop...

Post by zer0 »

admin wrote:Googling for MSI K9N6SGM-V max ram I found several sites that state 4GB -- swarm intelligence at work I hope.
Yep, MSI typos at their best :lol: Some may call that false advertising :roll: Once you upgrade to 4GB, don't be alarmed to see different memory amounts reported by your 32-bit XP and 64-bit Win 7. You can force XP to see all 4GB, but I wouldn't do that if I were you... :twisted:
Reporting a bug? Have a wish? Got a question? Use search - View roadmap - FAQs: Forum + XY site
Windows 7/10
Always using the latest stable two-decimal build

admin
Site Admin
Posts: 67248
Joined: 22 May 2004 16:48
Location: Win8.1, Win10, Win11, all @100%
Contact:

Re: Back from the Shop...

Post by admin »

OK, just opened the Win7 package and out come 2 DVDs:
- OEM preinstallation kit
- Win7 Pro 64

Do I need the first one at all???

Post Reply