Code: Select all
XYplorer Beta Club
v12.20.0205 - 2013-03-02 12:20
! SC download: Was affected by the locale. Fixed #2.
! SC readurl: Did not support https. Fixed #2.
Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.Code: Select all
v12.20.0206 - 2013-03-03 20:10
+ Address Bar: Additional support for the TAB key:
On closed match list:
TAB: If content NOT selected and caret on right end:
Open match list.
On dropped match list:
TAB: Move down in match list (to first item if none selected).
Shift+TAB: Move up in match list (to last item if none selected).
Ctrl+TAB: Update match list to current list item.
Ctrl+Alt+TAB: Update match list to parent of current list item.
+ Address Bar: Now, when no dropdown is open and the contents are
current, ESC toggles the selected state of the AB contents: If
there is any selection, ESC will remove it (caret to right end),
else ESC will select all.
FYI, when the contents are non-current (e.g. when you type
something into the AB) ESC will restore the contents. This has
always worked like that.
Code: Select all
v12.20.0207 - 2013-03-04 10:51
+ Address Bar: Changes and enhancements in TAB key support:
On closed match list:
Ctrl+TAB: Open match list at cursor position.
On dropped match list:
TAB: Move down in match list (to first item if none selected).
Shift+TAB: Move up in match list (to last item if none selected).
Ctrl+TAB: Update match list to current list item.
If no list item selected: close match list.
Ctrl+Shift+TAB: Update match list to parent of current list item.
[Ctrl+Alt+TAB: (the same, but will not work on Win7 and later)]
So here we have 4KN: Ctrl, Shift, TAB, Enter = full navigation.
* To make the above work from now on Ctrl+TAB and Ctrl+Shift+TAB
will not trigger "Cycle Tabs" (or whatever function you assigned
these combinations to) anymore when the focus is in the Address
Bar.
Code: Select all
v12.20.0208 - 2013-03-04 18:10
+ Address Bar: Additional TAB key support:
On closed match list:
Ctrl+Shift+TAB: Open match list to parent of current AB item.
[Ctrl+Alt+TAB: (the same, but will not work on Win7 and later)]
* Background Jobs: From now on, you get "Start Job Now" in a pending
job's context menu also when the queue is not paused. Before, this
command was only shown when the queue was paused.
Code: Select all
v12.20.0300 - 2013-03-05 12:00
= MAINTENANCE RELEASE.
+++ 4 Key Navigation. Now you can browse the whole computer by just 4
keys (Ctrl, Shift, Tab, Enter) in the Address Bar.
+++ Mouse Click Navigation. Now you can browse the whole computer by
just using the Left and Right mouse button in the Address Bar.
+++ Bug fixes.
v12.20.0209 - 2013-03-05 11:24
* Updated the help file.
* XYcopy: Updated to 2.10.0030.
Code: Select all
v12.20.0302 - 2013-03-05 21:36
* Auto-Complete: Some experimental refinements:
- Matching paths are listed unslashed again (as already before
v12.20.0201). This conforms to the standard shell auto-complete
and allows for going down a level by typing "\".
- When you move around the match list by Tab or arrows and leave
the list at the upper or lower end, then the list gets totally
unselected and the edit box is restored to the original text
that triggered the list. Again standard, and useful too.
+ MCN: Now Ctrl+Click on the edit box icon will open/update the
match list to the parent of the current Address Bar item.
Code: Select all
v12.20.0303 - 2013-03-06 10:40
+ MCN: The context menu of the dropdown list items now features the
command "Up" to browse the parent folder of the currently browsed
folder. Functionally identical to Ctrl+Click on the edit box icon.
+ MCN: Now the wheel for scrolling the match list also works over
the edit box.
Code: Select all
v12.20.0401 - 2013-03-08 21:42
+ Recent File Operations: Pops a menu by which you can apply recent
file operations (Copy and Move) to the currently selected files,
using the same operation and target path as recently.
The menu draws its data from the Action Log and is organized in
two sections:
- Section 1: Recent file operations from *here*, chronologically
ordered from youngest to oldest (up to 10)
- Section 2: recent file operations from *elsewhere*,
chronologically ordered from youngest to oldest (up to 10)
Copy and Move operations are mixed, Move is indented for clearer
distinction.
NOTE: This feature is work in progress (but appears to work very
well and to be very useful) and is currently only reachable via a
pseudo scripting command:
::rfo;
Planned is a menu command and a toolbar button with dropdown.
% List: Switching views while thumbnails are being created works
smoothly now.
Code: Select all
v12.20.0402 - 2013-03-09 12:28
+ Toolbar: Added button "Recent File Operations".
Credits for the icon goto http://www.doublejdesign.co.uk.
+ Recent File Operations: Hold CTRL to go to the selected target
path (instead of repeating the file operation).
Code: Select all
v12.20.0403 - 2013-03-09 16:11
+ Menu Edit: Added command "Recent File Operations...".
* Recent File Operations: Improved algorithm and toolbar icon.
BTW, IMO killer feature.
Code: Select all
v12.20.0404 - 2013-03-11 20:09
+ Toolbar: Added button "Type Stats and Filter". Pops a menu of all
file types contained in the current file list (no folders), order
by count (most frequent on top). Click any of the types to filter
(Visual Filter) the list by this type.
Credits for the icon goto http://www.fatcow.com/free-icons.
+ Recent File Operations: Added Alt+F7 as factory default keyboard
shortcut.
+ Tweak "StatusBarNoVersion": Set to 1 to suppress showing the file
version info for executables in the status bar. Reason: Showing
the file version info can be slow with certain virus scanners.
StatusBarNoVersion=1
Code: Select all
v12.20.0405 - 2013-03-12 20:04
+ Menu View | Tab: Added command "Type Stats and Filter".
+ Toolbar | Type Stats and Filter: Now you can modify the sort order
of the popup menu via right-clicking the button. There are two
options:
- Sort by Count (factory default)
- Sort by Extension
This also affects the popup triggered by Menu View | Tab | Type
Stats and Filter.
+ Configuration | Controls and More | Miscellaneous: Added option
"Show version information in the Status Bar". Tick it to show the
embedded version information of exectuables, DLLs, DRVs, etc. (if
they have any) right in the Status Bar on selecting such a file.
This setting replaces the tweak StatusBarNoVersion added in
v12.20.0404.
Note that previously this setting had been hard-coded to ON, but
recent developments in virus scanners caused notable delays with
it so I opted to make it optional.
! Edit | New Items: Icons were not shown since v12.20.0403. Fixed.
! Outlook Drop: Since 20120917, a tiny formatting bug could affect
how the template of messages dropped from Outlook was resolved.
Fixed.
% List: Switching views while thumbnails are being created works
smoothly now, #2.
Code: Select all
v12.20.0406 - 2013-03-13 09:55
* MLS: Updated to version 8.27. Upgrading directly through ITT.
TRANSLATORS: Always backup your work before upgrading.
* Updated the help file.
% List: Switching views while thumbnails are being created works
smoothly now, #3.
Code: Select all
v12.20.0407 - 2013-03-13 21:13
% List: Switching views while thumbnails are being created works
smoothly now, #4.
! Type Stats and Filter: The <none> (no extension) was not handled
clever enough to cope with language switch. Now it's better.
! Toolbar: The new button tooltips were not updated on the fly when
switching the language. Fixed.
Code: Select all
v12.20.0408 - 2013-03-14 11:25
! Type Stats and Filter: Under Vista and later the menu did not show
all icons. Fixed.