Here's the new BETA (32-bit)

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0108 - 2012-12-09 13:47
    * Visual Filters: Now the caption of a VF can have a short and a 
      long version, the former used for tab captions (where space is 
      scarce), the latter for menu captions (where space is abundant).
      The short and the long version are separated by "|" (pipe).
      This feature has been added especially to improve the appearance 
      of the new Powers Filters which otherwise take too much space in 
      the tab headers. Now they are defined e.g. as follows:
        "30 Mins|Modified In The Last 30 Mins" ageM: <= 30 n
        "3 Hours|Modified In The Last 3 Hours" ageM: <= 3 h
        "Today|Modified Today" ageM: d
        "Week|Modified This Week" ageM: w
        "Year|Modified This Year" ageM: y
      To update you have to clear all Power Filters in List Management.      
    ! File Compare: Command "Compare Current File With Previous File" 
      would not work when the list was (auto-)refreshed right before 
      triggering the command because the internal "current" and 
      "previous" file pointers then pointed to the same file. Fixed.
    ! Tweak CTBNoRClickDefaultCommands did not work when the right-click 
      event used the load() command. Fixed.
    * MLS: Updated to version 8.5. Download update from here:
        http://www.xyplorer.com/download/Language.zip

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0109 - 2012-12-10 11:13
    * Visual Filters: Now in a fresh installation "Toggle Visual Filter" 
      will default to "Modified Today". Before, nothing happened on this 
      command because there is no previous VF at this point.
    ! Tabsets: Tweak TabsetsNoPaneActivation flickered. Fixed.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0110 - 2012-12-11 16:32
    + ITT | Edit: Added command "Compare Old and New Original". After 
      using the "Upgrade Language File" command and filtering the 
      "Partially Translated" items (to show only the items that have 
      been modified by the upgrade), this new command will help you to 
      spot the difference(s) between the previous and the current state 
      of a changed item. Sometimes only a single word changed but 
      without seeing or remembering the original it is hard to know 
      which. This command will help you with updating the translations.
    * ITT: Command "Upgrade Language File" now immediately loads 
      "Reference.lng" and performs the upgrade, without first dumbly 
      asking you to locate "Reference.lng". The latter dialog is only 
      opened when "Reference.lng" is found found where it is expected.
    * Updated the help file.
    * MLS: Updated to version 8.6. Download update from here:
        http://www.xyplorer.com/download/Language.zip
    ! Find Files: Mounting or dismounting a drive would overwrite a 
      currently open search results tab even if is it locked. Fixed. Now 
      the tab remains untouched (even if it is not locked).

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0111 - 2012-12-12 14:42
    * Tree: In v9.40.0111 - 2010-09-04 15:18 the following has been 
      added:
        When selecting a new folder by keyboard (= on KeyUp), there 
        will now be a 300 msec delay before the browsing is attempted. 
        This will prevent the usual hang when you meet locations that 
        aren't available for whatever reasons (floppies, unconnected 
        network locations, empty CD-drives, etc.).
      Now this delay is only applied before browsing non-fixed drives 
      (floppy, removable, mapped, CD-ROM), and servers and shares. Not 
      fixed drives and normal folders. This results in a much snappier 
      (key driven) tree browsing experience.
    ! MLS: There is a small problem with pseudo-duplicate items 
      (homonyms in English but not necessarily homonyms in other 
      languages). I made an experiment to fix this in one place, and it 
      affects about 10 items. These items will have to be translated 
      again although they did not really change. Sorry for that, but 
      the Suggestions list in ITT will make it a single-click affair.
    * MLS: Updated to version 8.7. Download update from here:
        http://www.xyplorer.com/download/Language.zip
    * ITT | Edit | Compare Old and New Original: Now you can edit the 
      translation right in the popup text box. When you OK the dialog 
      the edited translation is inserted into the translation field.
    ! ITT: Fixed a glitch where two controls were drawn of each other.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0112 - 2012-12-13 21:00
    * Configuration | Sort and Rename | Allow move on rename: Now also 
      "/" is supported as path component separator.
    + ITT: Added function "Export All Translations To Text File" to menu 
      Tools. You can use this text file for spell checking.
    + ITT: Added function "Upgrade Language File (Download)" to menu 
      File. Downloads the latest reference file from the server 
      (http://www.xyplorer.com/download/Reference.lng), stores it 
      locally (overwriting any older Reference.lng without asking 
      questions) and upgrades the currently loaded language file to the 
      latest state.
    * MLS: Updated to version 8.8. Upgrading now directly through ITT.
    % ITT: Improved upgrading logic. Upgrading like the one from 8.6 to 
      8.7 (handling some pseudo-duplicates) now works nicely. All new 
      items are auto-translated based on the translations of their 
      pseudo-twins and colored yellow ("Mostly Translated") for manual 
      checking.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0113 - 2012-12-14 13:52
    * MLS: From now on, the originals in the "[messages]" section show 
      the accelerators. Before, any accelerators had been removed from 
      the originals. This fixes an issue concerning the disambiguation 
      of pseudo-duplicates. It also improves the user experience with 
      the ITT previews.
    * MLS: Updated to version 8.9. Upgrading now directly through ITT.
      TRANSLATORS: This is a revision of a very early decision, so 
      upgrading LNG files to this new way is a bit tricky and needed a 
      lot of thought. Apparently it all worked out well. Nevertheless: 
      (As always!) Keep a backup of your current work before upgrading!
    * Tabsets: Tweak TabsetsNoPaneActivation is now ON by factory 
      default.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0114 - 2012-12-14 16:00
    ! Info Panel: The tab captions did not support Unicode, LOL. Fixed.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0117 - 2012-12-15 19:22
    * Updated the help file.
    ! ITT: Progress bar drawing glitches. Fixed.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0118 - 2012-12-15 20:18
    ! ITT: Progress bar had some testing code active. Fixed.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0119 - 2012-12-16 12:41
    % Configuration Dialog: Now its size adjusts to the screen size, 
      i.e. you get a little more space and less scrolling when your 
      screen is bigger.
    * MLS: Updated to version 8.10. Upgrading now directly through ITT.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0120 - 2012-12-16 12:57
    * Configuration Dialog: Section titles larger.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.80.0122 - 2012-12-17 11:36
    + Tweak to automatically replace invalid characters when renaming a 
      file by paste or typing.
        RenameAutoReplaceInvalidChars=1
      Note: This feature had been hard-enabled in v11.80.0102 - 2012-12-
      04 21:54, but since a mysterious problem with Japanese filenames 
      surfaced I decided to make it optional until the problems are 
      solved. Later the tweak will be raised to GUI level.
v11.80.0121 - 2012-12-17 11:03
    * Inline Rename in Tree and List: Now illegal characters in pasted 
      or typed input are replaced by the default character "." (dot). 
      The previous default character "·" (mid dot) was not available in 
      all code pages, e.g. in Codepage 932 (Japanese Shift-JIS).
    * XYcopy: Updated to 2.10.0017.
    ! Favorite Folders popup menu: Glitch in the captions parsing since 
      20121209. Fixed.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings | Backup your Application Data Folder)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.90.0003 - 2012-12-18 17:54
    * Everything: Adjusted everything for taking French and German.     
    * Configuration Dialog: Adjusted the dialog for taking French and 
      German. Both languages need an enormous space so lots of resizing 
      and shifting had to be done, and it was necessary to add content 
      scrolling when the dialog (resp. the screen) is too small to show
      everything at once.
    + Configuration | Sort and Rename: Added option "Auto-replace 
      invalid characters". If ticked then invalid characters in pasted 
      or typed input are replaced by the character defined in 
      Configuration | Templates | Character to replace invalid 
      characters in dropped messages. If no character is defined then 
      "." (dot) is used.
      Applies to inline rename in Tree and List as well as to dialog 
      based rename (Configuration | Sort and Rename | Use dialog to 
      rename single items).
      Elevates the RenameAutoReplaceInvalidChars tweak to GUI.
    ! Auto-replace invalid characters: Did not work correctly with 
      Japanese (and probably other languages). Fixed.
    + ITT: Now the filter ignores accelerators, so e.g. filter 
      "clipboard" will match item "To Cl&ipboard".
    * MLS: Updated to version 8.11. Upgrading now directly through ITT.
    ! Configuration | Menus, Mouse, Safety | Navigation commands in List 
      context menu: Ticking this command kicked "New Folder" and "New 
      Text File" commands out of the List empty space context menu. 
      Fixed.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings Special | Backup Application Data Folder...)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.90.0004 - 2012-12-19 15:05
    * Everything: Minor adjustments for Russian and Portuguese.
    + MLS | Grammatical Number: Now you can optionally prefix the stem, 
      separated by | from the affixes. Useful in many languages, e.g. in 
      Latin or Swahili:
        ::lang_testnum "<#> <domin|~us;~i> <valid|~us;~i>", 5, 1;
        ::lang_testnum "<#> <toto|m~;wa~>", 5, 1;
      (If the stem is not explicitly prefixed then the first slot is 
      taken as stem by default: <file;~s>.)
      All this is just to spare the translators some typing and to make 
      the LNG file a bit smaller.
    ! Find Files | Type Filter: Current setting was written as string 
      into INI file, which is obvious nonsense now in a situation of a 
      possible quick language switch. Fixed: Now the setting is written 
      as index.
      Note: This could not be upgraded nicely so your Type Filter will 
      be reinitialized to 0 ("All types") when you start this version.
    ! ITT: Issue with a string containing "%windir%\Notepad.exe" (the \N 
      was falsly interpreted as line break). Fixed.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings Special | Backup Application Data Folder...)
before running a new BETA version. This will also help in fixing any fresh bugs.

[admin]

Change Log for the latest XYplorer BETA version:

Code: Select all

v11.90.0007 - 2012-12-20 16:59
    + Menu Help: Added toggle "Back to English". Took me 6 weeks to get 
      this right but finally it seems I got it. Extremely complex job.
      Note that this toggling will be imperfect if the language file is 
      not up-to-date.
      TRANSLATORS: This item should NOT be translated! (And if you do it 
      come out as "Back to English" anyway! :))
    - Menu Help: Removed toggle "Remove Language on Restart". It's 
      replaced by the toggle "Back to English".
    * MLS: Updated to version 8.12. Upgrading directly through ITT.
      TRANSLATORS: Always backup your work before upgrading.

To download the latest BETA version choose a download package: (1) Installer Package, (2) No-Install Package.

Note that BETA versions are work in progress and might contain fresh bugs. You have been warned.
It's a good idea to backup your complete XYplorer settings (menu File | Settings Special | Backup Application Data Folder...)
before running a new BETA version. This will also help in fixing any fresh bugs.