v11.00.0004 - 2012-05-03 15:56
+++ Menu File: Added the toggle "Floating Preview" (F11), which
shows/hides a non-modal preview window. The size and absolute
screen position is stored between sessions.
Thank you! I am very fond of this new feature and the possible future support of more file types.
I have two questions:
Is it possible to make this window remember not only its size and position, but also if it was maximised or not?
For whatever reason (I think Don explained that recently) I had to manually change the keyboard shortcut for Full Screen Preview to the new value Shift+F11, but can not find where one can change the shortcut for the Floating Preview (want to set it to F11).
Thoughts: I am using the same portable installation on two places - on one I have two monitors and on the other only one. While with two, I like to position the Floating Preview on the second monitor, either maximised or not. I have not yet tested what will happen, when I appear with the saved configuration at the other place, where only one monitor is available, and invoke Floating preview. I think that ideally the positions of both circumstances could be saved and later select from, according to the number of monitors available. But, this is perhaps far fetched.
Anyhow, thank you once more for something which I believe is going to develop almost into a killer feature.
>Is it possible to make this window remember not only its size and position, but also if it was maximised or not?
Maximised? For that you would rather use the full screen preview. But, ok, there will be a use for it later when I add more types.
>... but can not find where one can change the shortcut for the Floating Preview (want to set it to F11)
Under menu File...
Borut wrote:Thoughts: I am using the same portable installation on two places - on one I have two monitors and on the other only one. While with two, I like to position the Floating Preview on the second monitor, either maximised or not. I have not yet tested what will happen, when I appear with the saved configuration at the other place, where only one monitor is available, and invoke Floating preview. I think that ideally the positions of both circumstances could be saved and later select from, according to the number of monitors available. But, this is perhaps far fetched.
In the recent version I added some logic to ensure that the Floating Preview is always visible (within the bounds of the current "virtual screen" (the bounding rectangle of all display monitors).
Yes, I think it is a bit far fetched. (But it would be technically possible, like you said, to save different positions according to the number of monitors available. So maybe later...)
v11.10.0001 - 2012-05-16 15:19
* Full Screen Preview: Rewritten from scratch.
My experience is now extremely positive. This is the first time (at my place) that on MDBU the zoomed image follows the mouse movements on floating screen, full screen, info panel and thumbnails view! Also, full screen seems to appear always on the same monitor, on which floating was previously used. Also, this appears to be saved between sessions. Everything seems very logical now (at least to me).
I was reluctant to report about these things before, since I was not sure if the unexpected was happening due to some specifics of my configurations.
I've got another question with the Floating preview.
(First, this is a great feature, since it does not only allow for such a preview pane e.g. on the right of your main XY pane, on a large screen, but also allows for two-screen setup - can't try at this time, but seems evident to be possible.)
In the help file, under "Floating preview", I read,
"Note that changing the current file in the main form will update the preview, and vice versa: Wheeling through the preview (or key Up/Down) will change the current file in the main form -- and this way only previewable files are selected. There is a toolbar button to toggle the Floating Preview.", i.e.
"changing the current file in the main form will update the preview, and vice versa".
Well, if the fp (floating preview pane) has focus (by mouseclick in its caption), if then I press the left and right arrow keys, not only the preview within the fp changes, but also, within the main pane, the selected file is updated, i.e. the selection changes a file forward / backward, so the two panes are in synch, which is perfect.
On the other hand, if I change the selection within the main pane, by pressing right / left arrows when the main pane has focus (and which would be the normal situation), the previewed file (i.e. the file shown within the fp) will NOT change, which is extremely unhandy since it's out of synch, for one, and thus it forces you to click with the mouse into the pf caption in order to make that pf having the focus, in order for any browsing.
Of course, you can click on any file within the main pane, and then it will be shown within the fp, but this makes one click per file, no browsing experience from that. So in the end, for browsing any sub-folder, you must click into the fp caption in order to make the left/right arrow keys functional, then revert to main pane, choose the next subfolder there, click again into the caption of the pf, etc., etc.: No smooth toggling between tree and main pane by keys, and browsing, by arrow keys, from there: That's a lot of fuss when it could be very elegant.
This is the same problem as it was / is in / with the normal preview pane: No browsing within the displayed files by just "staying" (i.e. focus stays) in the normal pane, and pressing the arrow keys there, but unnecessaryly having to click on any entry there in order to display it (and pressing "enter" would open your file in your default external program, which is even worse if done by accident).
Do I overlook something, or is the fp crippled by the same missing function as has always been the normal preview?
If this behavior of XY is on purpose, is there a possibility to have the behavior I need by option, then? I suppose that what I want, is the exact behavior that 90 p.c. or more of users would prefer.
xyxel wrote:On the other hand, if I change the selection within the main pane, by pressing right / left arrows when the main pane has focus (and which would be the normal situation), the previewed file (i.e. the file shown within the fp) will NOT change, which is extremely unhandy since it's out of synch, for one, and thus it forces you to click with the mouse into the pf caption in order to make that pf having the focus, in order for any browsing.
This is not like that here, and certainly not desired anywhere, so it looks like a bug. Only I cannot reproduce it.
Does normal UP/DOWN key browsing in the list update the Properties tab in the Info Panel, or the Status Bar contents?
Thank you for responding, and for your welcoming me.
I tried again. No, Up/Down Arrows don't bring any better results, as do PgUp/PgDn keys neither. This is to say, they all change the selection in the normal pane, i.e. if you have .jpg's, the file name under the thumbnail picture there gets the usual blue background, indicating that file is "selected", but within the fp, no change whatsoever (and pressing "enter" will open the .jpg within my default program for that, the same with clicking on the thumb or on the filename there). I must indeed bring focus to the fp, and then only my arrow keys will work in the expected way: Updating of the thumb / file name within the normal pane, AND updating the picture within the fp.
I must say that within my tries, for some moments, the expected behavior was given, but then, I changed the folder, and it was again as it had been before: no updating of the fp file when browsing within the normal pane.
I then tried with many folders, again and again, but to no avail: The expected behavior didn't occur anymore, not even for some files.
I think I remember a similar bug / behavior described in the forum for the traditional preview pane, years ago, where people said something like, updating within the normal pane does not update the display within the preview pane, and they were told that this was by design? Or did they say sometimes it works, and then again, it's not working?
I'm glad you say what I relate is NOT the expected behavior, so there will hopefully be a solution. I'm working with Win XP3, I've been updating to the very latest XY version yesterday; should I check for some options / settings that might intervene here? I reassigned some keys within XY; I'm running a macro program - but there isn't anything there that even comes near a possible cause to this phenomenon (The only macro with XY scope is "Move to last target" - which doesn't work btw since I didn't understand how to select a target in the first place - didn't get any help from the help file here, so the command always tells me, "no target has been chosen yet" or something like this: So this is NOT, as I would like to have it, simply the folder which was the target of my last drag'n'drop action).
I'll have another look into the forum in order to possibly find those old posts complaining about the normal preview pane not updating from changing of the file selection within the normal pane.
Status bar (has 3 sections): 20 items (10 GB free) [invariable of course] - 1 selected 100,00 KB (1000,000 bytes) [this IS updated, yes; all numbers are fictional] - xyz.jpg [this is NOT updated!!!]
Properties pane: here, NOTHING is updated!!!
I'd like to add that before updating yesterday, I had the version 10.80 (i.e. without the fp), so I used the normal preview pane for previews, and the behavior was exactly like it's now in 11.30: NO updating by just browsing, over many months (but I thought it was on purpose).
Now, with the fp, that fp which theoretically would be so nice, is made useless by this malfunction... but then, your asking about properties panes updating (which isn't done) will certainly help you with identifying my problem?
(I've got another Win XP3 computer, with a different system (different Windows licence, Toshiba instead of Sony, other use, other applications (both are notebooks though)) where I could install XY in order to verify - but since everything is different there, I would like XY to behave normally on my current Sony computer here.)
I should add that I've got Freecommander and xplorer2 (prof.) running permanently on my comp. So I shut down both file managers, then tried with XY anew: same as above, so there's no interference from these possible sources. I finally shut down my macro program, and no change in XY behavior described above.
No viruses, and Windows, etc. is updated regularly, idem with registry settings, etc. (CCleaner), regular "fresh" installs of Windows (i.e. from intermediate archives, without any trials), i.e. whenever I trial softwares, I reinstall a clean archive afterwards, and do a new archive after Windows updates, installation of new (bought) programs, etc. Thus, I don't have a really "virgin Windows", but a neat system not infected by dozens of trials and their possible residuals.
If there are registry settings I should check, please let me know.
admin wrote:I tried something in BETA v11.30.0110, please check whether it helps.
I was not testing this in previous versions. In 0110, at my place (WinXP), everything seems as expected (properties updated, fp updated, everything synchronised, keys producing expected movements in list and fp).
Note: It is important to understand that the interpretation of the depressed key (the associated action) depends on a) Whether one is currently in fp, or in the list; b) When in list, then on the current view used (details, list thumbnails).
Hello Borut, thanks for your clarification. I had always observed your point a), and I had intended to check for your point b) today (it occured to me yesterday after shutting down my system), but see below (but I'll check for your point b) as soon as the problems arise anew). (And it goes without saying there isn't any arrow keys re-assignment from my macro program, all the less so with faulty scope.)
Hello Don, Thank you very much for your continued interest in this matter; I'm sure there is some detail in the XY code causing this since I did never have similar problems in any other software I've ever used (except for totally unrelated bugs specific to any such software).
I've got a new "problem": XY "works like a charm" today (110!)... (And with my macro program, FreeCommander and X2 running...)
So I shut it down, opened it anew, several times: runs as you say it should, updating of properties, preview, fp, even with the folders I tried in vain yesterday (so it's not specific to possible problems with some files in there).
So I tried to remember "what was different" yesterday and the day before. I had running some other programs; so I loaded those into memory: no difference whatsoever, XY working smoothly.
I see TWO POSSIBLE CAUSES:
a) Memory problems. I use IE8, with 2 GB of RAM, which means that many a times, my virtual memory (shown by WinTaskManager) is not about 600 MB as it is now, but 1200 or 1400 MB; perhaps this problem will start (again) when my load goes there again.
b) My macro program, after some hours (There are a lot of key reassignments in other programs than XY: Whilst in XY, commands can be assigned to keys within XY, in many other applics key assignments are fixed, so I reassign those key combinations to more handy ones.). Yesterday, I shut all these things down, but shutting down a macro program is not necessarily freeing the memory from its residuals then, so they might have affected XY as before, even the program itself having ceased to run.
Thus, knowing now what's the normal behavior of XY is, and having experienced it's able to run like this on my system, I'll shut down Windows every time XY will present the faulty behavior in order to check (= for memory problems in general and with the macro program); if faulty behavior persists, I'll shut down Windows again but without loading the macro program (i.e. not automatic loading, only then shutting down). If faulty behavior persists, I'll try with 110 (which would be a bad idea IMO now since we would never know what caused the problems in 10.80 and 11.30.100).
In any case, I'll share my experiences here, be they only positive from now on or in case the problem occurs again (let's remember it occured, even here in 10.30, on two days, first day after updating (but perhaps not shutting down Windows and loading Windows anew, I don't remember), second day "from scratch on" (Windows being shut down between day 1 and day 2)).
Icannot but permanently observe now... (That's the real problem behind intermittent problems.)
Do I have to say it? 1 minute after writing this post, I went back to XY, and "nothing works", same problem as I've known it for the last six months; I didn't do a lot today, in IE8, just two sites including this one, total virtual memory not even 600 MB...
So... (to be edited)
Borut: Is has nothing to do with thumbs / list, with .jpg files or .exe or .txt files. No updating whatsoever, as explained yesterday, except (as yesterday) for the second of three entries in the status line, i.e. "1 selected 10 KB (10.000 bytes)": that's updated, and nothing more, for whichever types of files, in whichever folder. (But it was worth checking indeed.)
I consecutively shut down all my other running programs, incl. my macro program, to no avail.
I then shut down Windows and restarted it, assuring that my mycro program did NOT start with Windows, as it normally does.
Needless to say, XY works like a charm, for the time being (but it also did that from start this morning, WITH my macro program running).
So I'll do without my macro program for the time being (which is difficult but seems to be necessary), checking if the same faulty XY behavior starts again or not. I'll report.
Though if that's the case then unfortunately Don could never replicate it and we couldn't identify the cause.
I can't recall the last time I saw this behavior, but I'm also using a completely different laptop than I was then.