Has anyone been able to set up a fast and efficient (pre)viewer for .md files?
I wanted to exploit PowerToys' explorer add-ons which Gemini suggested was possible by adding "md>{D8034CFA-F34B-41FE-AD45-62FCBB52A6DA}" but that did not do the trick (empty window). Who's got a better approach?
Best .md Preview
-
MBaas
- Posts: 701
- Joined: 15 Feb 2016 21:08
-
FoxWMulder
- Posts: 30
- Joined: 29 Sep 2023 03:33
Re: Best .md Preview
You may use SumatraPDF 3.7
1. Overview
There are two ways to enable PDF previews in XYplorer using SumatraPDF:
Option 1 — Standard installation (recommended)
Install the regular, non-portable version of SumatraPDF. The installer automatically registers the Preview Handler in Windows.
Option 2 — Portable version (manual registration)
If you prefer using the portable version of SumatraPDF, you can manually register its Preview Handler in Windows by following the instructions below.
This allows you to keep using SumatraPDF as a portable application without performing a conventional installation.
2. Required Components
For the portable version, you will need:
- A portable copy of SumatraPDF.
- The **SumatraPDF 3.7 installer**, matching the architecture (32-bit or 64-bit) of your XYplorer installation.
- The following files:
- `PdfPreview.dll`
- `libsumatrapdf.dll`
Important: The Preview Handler architecture must match the architecture of XYplorer.
3. Downloading and Extracting the Required Files
Download the **SumatraPDF 3.7 installer** from the official website:
https://www.sumatrapdfreader.org/downlo ... pdf-viewer
You do not need to install the application. Instead, extract the installer contents using the following command:
Adjust the filename and destination path if necessary.
After extraction, make sure the following files are present in the destination folder:
- `SumatraPDF.exe`
- `PdfPreview.dll`
- `libsumatrapdf.dll`
4. Registering the Preview Handler
Create a BAT file named `RegisterSumatraPreview.bat`:
Change `D:\Programs\SumatraPDF` to the actual location of your SumatraPDF folder.
Run the BAT file as Administrator.
5. Configuring XYplorer
1. Open XYplorer Configuration.
2. Navigate to **Preview → Previewed Formats**.
3. Select **User-Defined Preview Handlers**.
4. Add the following handler for PDF files:
5. Apply the changes.
6. Important Notes
- Windows stores the absolute path to the DLL. If you move the SumatraPDF folder, you will need to register the Preview Handler again.
- Make sure the DLL files come from the same SumatraPDF 3.7 distribution.
- When updating SumatraPDF, it is recommended to repeat the registration process.
7. Unregistering the Preview Handler
To unregister the COM component, run:
To remove the Preview Handler entry from the Windows registry, run:
---
**Result:** SumatraPDF can now be used as a PDF Preview Handler in XYplorer, either through its standard installation or through manual registration of the portable version.
Unfortunately, in preview it does not allow selecting text. So I consider this a workable option, but not the best.
1. Overview
There are two ways to enable PDF previews in XYplorer using SumatraPDF:
Option 1 — Standard installation (recommended)
Install the regular, non-portable version of SumatraPDF. The installer automatically registers the Preview Handler in Windows.
Option 2 — Portable version (manual registration)
If you prefer using the portable version of SumatraPDF, you can manually register its Preview Handler in Windows by following the instructions below.
This allows you to keep using SumatraPDF as a portable application without performing a conventional installation.
2. Required Components
For the portable version, you will need:
- A portable copy of SumatraPDF.
- The **SumatraPDF 3.7 installer**, matching the architecture (32-bit or 64-bit) of your XYplorer installation.
- The following files:
- `PdfPreview.dll`
- `libsumatrapdf.dll`
Important: The Preview Handler architecture must match the architecture of XYplorer.
3. Downloading and Extracting the Required Files
Download the **SumatraPDF 3.7 installer** from the official website:
https://www.sumatrapdfreader.org/downlo ... pdf-viewer
You do not need to install the application. Instead, extract the installer contents using the following command:
Code: Select all
SumatraPDF-3.7-64-install.exe -x -d "D:\Programs\SumatraPDF"
After extraction, make sure the following files are present in the destination folder:
- `SumatraPDF.exe`
- `PdfPreview.dll`
- `libsumatrapdf.dll`
4. Registering the Preview Handler
Create a BAT file named `RegisterSumatraPreview.bat`:
Code: Select all
@echo off
set "DIR=D:\Programs\SumatraPDF"
set "CLSID={3D3B1846-CC43-42AE-BFF9-D914083C2BA3}"
if not exist "%DIR%\PdfPreview.dll" (
echo PdfPreview.dll not found!
pause
exit /b 1
)
regsvr32 /s "%DIR%\PdfPreview.dll"
reg add "HKCU\Software\Microsoft\Windows\CurrentVersion\PreviewHandlers" ^
/v "%CLSID%" /t REG_SZ /d "SumatraPDF Preview Handler" /f
echo Done.
pause
Run the BAT file as Administrator.
5. Configuring XYplorer
1. Open XYplorer Configuration.
2. Navigate to **Preview → Previewed Formats**.
3. Select **User-Defined Preview Handlers**.
4. Add the following handler for PDF files:
Code: Select all
md>{3D3B1846-CC43-42AE-BFF9-D914083C2BA3}
6. Important Notes
- Windows stores the absolute path to the DLL. If you move the SumatraPDF folder, you will need to register the Preview Handler again.
- Make sure the DLL files come from the same SumatraPDF 3.7 distribution.
- When updating SumatraPDF, it is recommended to repeat the registration process.
7. Unregistering the Preview Handler
To unregister the COM component, run:
Code: Select all
regsvr32 /u "D:\Programs\SumatraPDF\PdfPreview.dll"
Code: Select all
reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\PreviewHandlers" ^
/v "{3D3B1846-CC43-42AE-BFF9-D914083C2BA3}" /f
**Result:** SumatraPDF can now be used as a PDF Preview Handler in XYplorer, either through its standard installation or through manual registration of the portable version.
Unfortunately, in preview it does not allow selecting text. So I consider this a workable option, but not the best.
To see the attached files, you need to log into the forum.
-
Horst
- Posts: 1419
- Joined: 24 Jan 2021 12:27
- Location: Germany
Re: Best .md Preview
No, that's completely wrong.
SumatraPDF does not preview markdown files in any way.
Windows 11 Home, Version 26H2 (OS Build 26300.9974)
Portable x64 XYplorer (Actual version, including betas)
Display settings 1920 x 1080 Scale 100%
Everything 1.5.0.1424b (x64), Everything Toolbar 3.5, Listary Pro 7.1.0.47 beta
Portable x64 XYplorer (Actual version, including betas)
Display settings 1920 x 1080 Scale 100%
Everything 1.5.0.1424b (x64), Everything Toolbar 3.5, Listary Pro 7.1.0.47 beta
-
FoxWMulder
- Posts: 30
- Joined: 29 Sep 2023 03:33
-
yuyu
- Posts: 171
- Joined: 19 Jun 2018 12:40
- Location: Win 7 x64 - 100%
Re: Best .md Preview
I associated .md files with notepad3. No extra configuratiion was needed.
-
Native2904
- Posts: 164
- Joined: 23 Apr 2025 18:48
- Location: Aachen
-
Horst
- Posts: 1419
- Joined: 24 Jan 2021 12:27
- Location: Germany
Re: Best .md Preview
Power Toys File Manager Extensions has a good .md previewer.
This works in Explorere, and all file managers.
XY Preview has to be configured.
- Disable .md in the Text Files list.
+ Enable .md in the Document Files list
This works in Explorere, and all file managers.
XY Preview has to be configured.
- Disable .md in the Text Files list.
+ Enable .md in the Document Files list
Windows 11 Home, Version 26H2 (OS Build 26300.9974)
Portable x64 XYplorer (Actual version, including betas)
Display settings 1920 x 1080 Scale 100%
Everything 1.5.0.1424b (x64), Everything Toolbar 3.5, Listary Pro 7.1.0.47 beta
Portable x64 XYplorer (Actual version, including betas)
Display settings 1920 x 1080 Scale 100%
Everything 1.5.0.1424b (x64), Everything Toolbar 3.5, Listary Pro 7.1.0.47 beta
-
MBaas
- Posts: 701
- Joined: 15 Feb 2016 21:08
Re: Best .md Preview
Thank for all the input! Actually FoxWMulder's suggestion magically enabled the pdf previewer to preview md, too!
I also got the ShellExt for convenience. Couldn't get the Powertoys-handler to preview (which would have been the preferred solution) and gave up, as there were alternatives...
I also got the ShellExt for convenience. Couldn't get the Powertoys-handler to preview (which would have been the preferred solution) and gave up, as there were alternatives...
XYplorer Beta Club