CEA - Custom Event Actions

[LittleBiG]

Wrong placement on monitor 1. (EDIT: by the way, unnecessary vertical scroll bars appear on several other tabs)

Weird, but I could not reproduce it with exactly the same settings. Did you use another font/font size?

In XY? I don't think so. I started a new instance for the safety sake, 2 examples from the Configuration (other tabs under General are ok):

[admin]

Totally weird. Cannot explain.

[admin]

v21.30.0013 - 2020-12-07 14:51
    + Custom Event Actions: Now the beginnings of the scripts are shown in the 
      list. A blue dot tells you that a "Run Script" action is active. A red dot 
      tells you that no script yet exists to be run by this action.

The script column is not visible. It is outside the control on the right side. A few pixels (maybe 5) are visible.

xy config dialog v21.30.0013.JPG

Well, life's full of surprises (to quote Lemmy), but I was not ready for this one. You saw the Script column in the version before this, right?

[LittleBiG]

Well, life's full of surprises (to quote Lemmy), but I was not ready for this one. You saw the Script column in the version before this, right?

The strange is that I can see it even now in my regular instance! But if I open a new instance, I also can't see it

[kuiwu_zh]

What I showed was correct.

snap_screen_20201208002440.png (60.32 KiB) Viewed 2196 times

[admin]

The strange is that I can see it even now in my regular instance! But if I open a new instance, I also can't see it

Ah, good hint! Me neither! Gonna fix...

[kuiwu_zh]

I have opened several instances and the display is correct.


Various Information:

Code: Select all

各种信息

XYplorer: 21.30.0013 (Pro Edition - Lifetime License Pro)
Upgraded from: 20.60.0000
Loaded in: 485 毫秒 at 2020-12-08 00:32:41
Uptime: 53 秒    Runtime: 6.00.9815
Memory Usage: 36,032 KB, Virtual Memory Size: 17,252 KB

OS: Windows 8.1 Professional, 64-bit, Build 9600
OS Uptime: 15 小时, 4 分, 44 秒
Time Zone: 中国标准时dll,-572, 中国夏令时.dll,-571
UTC Offset: +08:00
User Role: User
Themes: Yes (Aero)    RealSystem32: Yes

System Locale ID: 2052 (zh-CN)
Thread Locale ID: 2052 (zh-CN)
Default ANSI Code Page: 936   (ANSI/OEM - 简体中文 GBK)
Active ANSI Code Page: 936   (ANSI/OEM - 简体中文 GBK)
Default OEM code page: 936   (ANSI/OEM - 简体中文 GBK)
Active OEM Code Page: 936   (ANSI/OEM - 简体中文 GBK)
DBCS Code Page: Yes
Main Contents Font: 微软雅黑 9.75

DblClick Time: 500 ms
Screen: 1920x1080, 1/1 (Primary), Virtual: (0, 0) - (1920, 1080), Work: (0, 0) - (1920, 1050)
Screen DPI: 96 (100%)   twX: 15   Stretch: 1   sLF: 1   Toolbar Zoom: 1 (-1;1)
Screen Color Depth: 32
DPI awareness: Per monitor
Auto Scaling: Yes, Yes

UseDPIAwareIconSizes: No, Yes
Icon Size: Small=16, Large=32
Icon Size Controls: Small=16, Large=32
Icon Size Recommended: Small=16, Large=32

Command Line: /new
Command Normalized: /new

App:              	C:\EDA_Tools\XYplorer\XYplorer.exe
Ini File:         	C:\EDA_Tools\XYplorer\Data\XYplorer.ini
App Data Path:    	C:\EDA_Tools\XYplorer\Data\
Pane 1 Data Path: 	C:\EDA_Tools\XYplorer\Data\Panes\1\
Pane 2 Data Path: 	C:\EDA_Tools\XYplorer\Data\Panes\2\
Catalogs Path:    	C:\EDA_Tools\XYplorer\Data\Catalogs\
Icons Path:       	C:\EDA_Tools\XYplorer\Data\Icons\
New Items Path:   	C:\EDA_Tools\XYplorer\Data\NewItems\
Scripts Path:     	C:\EDA_Tools\XYplorer\Data\Scripts\
Thumbs Cache:     	C:\EDA_Tools\XYplorer\Data\Thumbnails\
Catalog:          	C:\EDA_Tools\XYplorer\Data\Catalogs\CatalogNew.dat
Tags Database:    	C:\EDA_Tools\XYplorer\Data\tag.dat

Language Support:	8.126
Language:     	简体中文 (Simplified Chinese) - 8.125
Locale:       	0, 1, 936   (ANSI/OEM - 简体中文 GBK), 系统默认 (936)
Translator:   	Alhagi Yan
Language File: 	C:\EDA_Tools\XYplorer\Data\ChineseSimplified.lng

[klownboy]

Well for me the jury is still out on whether it's necessary to actually see that script in the script column. It makes for a bit of an ugly presentation and I'm not sure if it's necessary to see the script without clicking. With long file paths and ending ellipses you don't really see what's important - the filename - unless you went with middle ellipses. Seeing the red or blue dot and then clicking it would be enough for me. It's not something we'll be changing everyday once it's established.

CEAs.jpg (71.1 KiB) Viewed 2194 times

[LittleBiG]

Totally weird. Cannot explain.

I detached the monitor from my notebook and restarted XYplorer. There are no superfluous vertical scrollbars at all, everything works as it should. If I reattach my monitor when XY is running, the tabs remain ok. But after restart, I get the vertical scrollbars back. Is something incorrectly recognized by XY about the monitors, when there are more than one?

[admin]

Well for me the jury is still out on whether it's necessary to actually see that script in the script column. It makes for a bit of an ugly presentation and I'm not sure if it's necessary to see the script without clicking. With long file paths and ending ellipses you don't really see what's important - the filename - unless you went with middle ellipses. Seeing the red or blue dot and then clicking it would be enough for me. It's not something we'll be changing everyday once it's established.CEAs.jpg

I find it useful. You could place a comment in front to make it more useful to you.

[admin]

Totally weird. Cannot explain.

I detached the monitor from my notebook and restarted XYplorer. There are no superfluous vertical scrollbars at all, everything works as it should. If I reattach my monitor when XY is running, the tabs remain ok. But after restart, I get the vertical scrollbars back. Is something incorrectly recognized by XY about the monitors, when there are more than one?

Is the data in screen; all correct?

[LittleBiG]

Totally weird. Cannot explain.

I detached the monitor from my notebook and restarted XYplorer. There are no superfluous vertical scrollbars at all, everything works as it should. If I reattach my monitor when XY is running, the tabs remain ok. But after restart, I get the vertical scrollbars back. Is something incorrectly recognized by XY about the monitors, when there are more than one?

Is the data in screen; all correct?

I cannot see the scale of the second monitor in the screen, which is 100%.

[admin]

This problem happens on the 1st monitor?

[admin]

Well for me the jury is still out on whether it's necessary to actually see that script in the script column. It makes for a bit of an ugly presentation and I'm not sure if it's necessary to see the script without clicking. With long file paths and ending ellipses you don't really see what's important - the filename - unless you went with middle ellipses. Seeing the red or blue dot and then clicking it would be enough for me. It's not something we'll be changing everyday once it's established.CEAs.jpg

I find it useful. You could place a comment in front to make it more useful to you.

But, FYI, I've also been thinking about a multiline tooltip (on hovering the cell) that shows the whole script (if it fits). I'm to opinions...

[LittleBiG]

100% is possibly 96 dpi

This problem happens on the 1st monitor?

If I use only one monitor (notebook display OR the monitor) they are ok. But when they are used at the same time in extended mode, the problem appears on both, doesn't matter on which I start XY.