How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
I have lots of files in network and many times I need to search for some particular items and it usually takes 1-2 minutes to finish the search.
Then I need to keep the searched results tab intact and select another tab to look into some other files.
The issue is that when I switch back to my search tab, it automatically starts a new search from scratch!!!
If the search is on a local drive, and among few folders, especially when using cached search, it won't be a big deal. But when it is in a network drive, it will be a big trouble.
Every time you want to switch back to your search tab, you should wait few minutes!!!
How could I disable auto search when I switch back to the search tab?
Then I need to keep the searched results tab intact and select another tab to look into some other files.
The issue is that when I switch back to my search tab, it automatically starts a new search from scratch!!!
If the search is on a local drive, and among few folders, especially when using cached search, it won't be a big deal. But when it is in a network drive, it will be a big trouble.
Every time you want to switch back to your search tab, you should wait few minutes!!!
How could I disable auto search when I switch back to the search tab?
-
highend
- Posts: 15016
- Joined: 06 Feb 2011 00:33
- Location: Win Server 2022 @100%
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
Afaik, you can't.
Storing your search in a paperfolder seems to be the only solution atm.
Try this script to do that...
Storing your search in a paperfolder seems to be the only solution atm.
Try this script to do that...
To see the attached files, you need to log into the forum.
One of my scripts helped you out? Please donate via Paypal
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
Thanks for the script. But another issue just popped up! As soon as I switch back to Paper Folder Tab it automatically refreshes all columns from scratch (Although Auto Refresh is turned off). Again I should wait for few minutes before all columns refresh! I have columns including special properties for video files which takes a long time to load (especially from a network folder).
Any idea on how to disable auto refresh when switching back to Paper Folder Tab?
-
highend
- Posts: 15016
- Joined: 06 Feb 2011 00:33
- Location: Win Server 2022 @100%
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
After executing the script you should close the search tab, otherwise you'll have the same problem as before
One of my scripts helped you out? Please donate via Paypal
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
After executing the script, the search tab is not open anymore. It will convert to paper folder. The issue is due to auto refreshing columns on switching to paper folder.
-
highend
- Posts: 15016
- Joined: 06 Feb 2011 00:33
- Location: Win Server 2022 @100%
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
I don't think that you can disable that behavior. I would try to tweak your custom columns in that case or remove all columns that aren't absolutely necessary when viewing that paperfolder...
One of my scripts helped you out? Please donate via Paypal
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
I have a custom column layout for my video files and the main idea behind my search is to search for video files in different folders, and then look at the columns for detailed info. Columns are defined by scripts which fetch information from "MediaInfo". The following column is an example which shows audio bitrate of a video file:
Code: Select all
$mediaInfo = "C:\Program Files\MediaInfo_CLI_20.09_Windows_x64\MediaInfo.exe";
return regexreplace(runret("$mediaInfo --Inform=Audio;%BitRate/String%- ""<cc_item>"""), "\r?\n");-
highend
- Posts: 15016
- Joined: 06 Feb 2011 00:33
- Location: Win Server 2022 @100%
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
Bitrate is something that exists as a normal property, you shouldn't need mediainfo to read that -> huge timesaver. You should really check your ccs if that info is already available via normal properties. But the best (and by far) the fastest way would be to tag your files with the necessary info and then only read these properties from the tag database instead of getting them on the fly via property() or mediainfo...
One of my scripts helped you out? Please donate via Paypal
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
I have tried all normal properties. For this example, normal audio bitrate does not work for multiple audio streams in video files. I have made my columns as efficient as possible and with this trick XYplorer saves a huge amount of time (compared to any other metadata app in the market) to analyze and compare detailed video properties all at once. The only problem is the Auto Refresh / Auto Search issue which could not be disabled by any means.highend wrote: ↑30 Oct 2020 19:37 Bitrate is something that exists as a normal property, you shouldn't need mediainfo to read that -> huge timesaver. You should really check your ccs if that info is already available via normal properties. But the best (and by far) the fastest way would be to tag your files with the necessary info and then only read these properties from the tag database instead of getting them on the fly via property() or mediainfo...
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
I have not tried tagging so far. I'll give it a try to see if it is possible to tag all these information or not.highend wrote: ↑30 Oct 2020 19:37 Bitrate is something that exists as a normal property, you shouldn't need mediainfo to read that -> huge timesaver. You should really check your ccs if that info is already available via normal properties. But the best (and by far) the fastest way would be to tag your files with the necessary info and then only read these properties from the tag database instead of getting them on the fly via property() or mediainfo...
-
highend
- Posts: 15016
- Joined: 06 Feb 2011 00:33
- Location: Win Server 2022 @100%
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
Sure it's possible. It's only a question of organization. Either use the 16 extra columns or a schema like:
Then any custom column would just get the information by using something like this:
Where <x> is just 1, 2, ..., x - The position of where you stored the belonging data...
<info 1>#::#<info 2>#::#...#::#<info x>#::# for the tags field. This would allow to store any amount of info in the tags db and still the usage of normal information (which should be separated by a different one than "#::#" of course.Then any custom column would just get the information by using something like this:
return gettoken(tagitems("tags",, <cc_item>), <x>, "#::#");Where <x> is just 1, 2, ..., x - The position of where you stored the belonging data...
One of my scripts helped you out? Please donate via Paypal
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
I tried to include some MediaInfo parameters as tags according to what you suggested but I was not successful.highend wrote: ↑30 Oct 2020 20:49 Sure it's possible. It's only a question of organization. Either use the 16 extra columns or a schema like:
<info 1>#::#<info 2>#::#...#::#<info x>#::#for the tags field. This would allow to store any amount of info in the tags db and still the usage of normal information (which should be separated by a different one than "#::#" of course.
Then any custom column would just get the information by using something like this:
return gettoken(tagitems("tags",, <cc_item>), <x>, "#::#");
Where <x> is just 1, 2, ..., x - The position of where you stored the belonging data...
Could you please give an example on how to fetch "Audio Bitrate" info from MediaInfo and include it in the tags? As I mentioned before, I used the following code to retrieve the information and include it in the column:
Code: Select all
$mediaInfo = "C:\Program Files\MediaInfo_CLI_20.09_Windows_x64\MediaInfo.exe";
return regexreplace(runret("$mediaInfo --Inform=Audio;%BitRate/String%- ""<cc_item>"""), "\r?\n");-
highend
- Posts: 15016
- Joined: 06 Feb 2011 00:33
- Location: Win Server 2022 @100%
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
Em no. You shouldn't do tagging from a custom column script (although that's possible).
You use a normal script that reads in all files with a (user configurable) list of extensions recursively with the current folder as it's root.
That script does the tagging and your custom columns only get the necessary data from the tags database afterwards.
Read the comments in the script carefully and decide which way you want to go, the "get tags by index" or by "defined names" and depending on which you want you need to comment in / out the necessary part and adapt your custom column scripts.
You use a normal script that reads in all files with a (user configurable) list of extensions recursively with the current folder as it's root.
That script does the tagging and your custom columns only get the necessary data from the tags database afterwards.
Read the comments in the script carefully and decide which way you want to go, the "get tags by index" or by "defined names" and depending on which you want you need to comment in / out the necessary part and adapt your custom column scripts.
To see the attached files, you need to log into the forum.
One of my scripts helped you out? Please donate via Paypal
-
amirvf
- Posts: 133
- Joined: 18 Oct 2020 00:46
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
Your suggestion to use tags is quite awesome and I have been working on it for the last 2 days to improve this valuable script.highend wrote: ↑01 Nov 2020 18:12 Em no. You shouldn't do tagging from a custom column script (although that's possible).
You use a normal script that reads in all files with a (user configurable) list of extensions recursively with the current folder as it's root.
That script does the tagging and your custom columns only get the necessary data from the tags database afterwards.
Read the comments in the script carefully and decide which way you want to go, the "get tags by index" or by "defined names" and depending on which you want you need to comment in / out the necessary part and adapt your custom column scripts.
Search for and tag video files [custom columns]_v0.1.xys
One of the main issues is the presence of some characters in "MediaInfo values" which are not allowed in "XYlorer tags". One of them is the presence of quotation mark (") in values, which results in the failure of tagging for the whole values (not only the value which contains the disallowed character), in the file being processed.
-
highend
- Posts: 15016
- Joined: 06 Feb 2011 00:33
- Location: Win Server 2022 @100%
Re: How to prevent "Find Files" from doing new search from scratch on switching back to search tab?
I've added a new topic for this script here:
viewtopic.php?f=7&t=22304
It has the ability to replace characters/strings before the tag happens as well.
The default is: replace double quotes with single quotes
but it allows to add additional replacements...
So if there are other chars that pose problems when tagging, mention them^^
viewtopic.php?f=7&t=22304
It has the ability to replace characters/strings before the tag happens as well.
The default is: replace double quotes with single quotes
but it allows to add additional replacements...
So if there are other chars that pose problems when tagging, mention them^^
One of my scripts helped you out? Please donate via Paypal
XYplorer Beta Club