1,223 ms: 4,097 ms - Load Maxi
...
Tree MaxiTree: Rows=909
Well, 909 rows is not much, would take around 250 ms on my machine.
But, if there are some unavailable network folder among those rows, it can take longer.
For starters I suggest you untick this: Configuration | Tree and List | Tree | Remember state of tree
There is an unavailable folder, as my desktop and my laptop are connected in a network via LAN, but the laptop is switched off most of the time. How can XYplorer's load time be shortened under the circumstances? Anything under 2 secs would be acceptable.
1) Could you check the setting of this: Configuration | Startup & Exit | Reconnect mapped network drives on startup
whatever it is, does it make a difference (on the next start) when you change it?
2) Untick this: Configuration | Tree and List | Tree | Remember state of tree
3) Were those mapped drives expanded when you last closed XYplorer? Was the last tree location on one of these drives?
1) Could you check the setting of this: Configuration | Startup & Exit | Reconnect mapped network drives on startup
whatever it is, does it make a difference (on the next start) when you change it? It does not seem to affect the speed. But interestingly, if the option is checked, then the first load takes 4+ secs and the subsequent loads seem to take much less.
2) Untick this: Configuration | Tree and List | Tree | Remember state of tree
I guess this one made a difference:
XY ver: XYplorer 17.50.0200
OS: Windows 10, 64-bit
Loaded: 2017-02-18 18:53:55 in 1,559 ms
0 ms: 583 ms - Start Load
583 ms: 40 ms - Init Language
623 ms: 50 ms - Load Language
673 ms: 9 ms - Load Settings
682 ms: 6 ms - Init Custom File Icons
688 ms: 41 ms - Init Controls
729 ms: 110 ms - Init Graphics
839 ms: 24 ms - Init Tabs
863 ms: 60 ms - Create Info Panel
923 ms: 83 ms - Set Interface Font
1,006 ms: 34 ms - Init Panes
1,040 ms: 0 ms - Init Tree
1,040 ms: 13 ms - Add Spec Folders
1,053 ms: 8 ms - Add Drives
1,061 ms: 2 ms - Add Portable Devices
1,063 ms: 0 ms - Init Start Path
1,063 ms: 6 ms - Tab Icons
1,069 ms: 1 ms - Load Catalog
1,070 ms: 1 ms - Load Tags
1,071 ms: 42 ms - Load Folder Size Cache
1,113 ms: 48 ms - Load Maxi Tree
1,161 ms: 0 ms - Init Custom Toolbar Buttons
1,161 ms: 6 ms - Init UDC and KS
1,167 ms: 17 ms - Load This Pane
1,184 ms: 13 ms - Load Other Pane
1,197 ms: 20 ms - Layout Window
1,217 ms: 17 ms - Layout Catalog
1,234 ms: 122 ms - Layout List
1,356 ms: 54 ms - Show Window
1,410 ms: 0 ms - Layout Catalog
1,410 ms: 147 ms - Layout List
1,557 ms: 2 ms - Init Menus
1,559 ms: - Load Done
MaxiTree: Rows=110, Nodes=113, Expanded=7
Check Existence of Subfolders in Tree: Yes
Pane 1: Items=6/6, Pane 2: Items=18/18, Catalog: Items=4
3) Were those mapped drives expanded when you last closed XYplorer? Was the last tree location on one of these drives? No. They have not been expanded since XYplorer was installed.
Is there a way to export a global configuration file once I am happy with all the tweaks, set up the Catalog, bars, etc.? I mean a single file that then can be imported and instantly configure XYplorer to my preference?