Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:09
In XY? I don't think so. I started a new instance for the safety sake, 2 examples from the Configuration (other tabs under General are ok):
XYplorer Beta Club
Forum for XYplorer Users and Developers
https://www.xyplorer.com/xyfc2/
CEA - Custom Event Actions
Page 6 of 16
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:18
Totally weird. Cannot explain. 
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:20
Well, life's full of surprises (to quote Lemmy), but I was not ready for this one.autocart wrote: ↑07 Dec 2020 16:52The script column is not visible. It is outside the control on the right side. A few pixels (maybe 5) are visible.v21.30.0013 - 2020-12-07 14:51 + Custom Event Actions: Now the beginnings of the scripts are shown in the list. A blue dot tells you that a "Run Script" action is active. A red dot tells you that no script yet exists to be run by this action.
xy config dialog v21.30.0013.JPG
You saw the Script column in the version before this, right?Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:24
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:26
What I showed was correct.
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:28
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:36
I have opened several instances and the display is correct.
Various Information:
Various Information:
Code: Select all
各种信息
XYplorer: 21.30.0013 (Pro Edition - Lifetime License Pro)
Upgraded from: 20.60.0000
Loaded in: 485 毫秒 at 2020-12-08 00:32:41
Uptime: 53 秒 Runtime: 6.00.9815
Memory Usage: 36,032 KB, Virtual Memory Size: 17,252 KB
OS: Windows 8.1 Professional, 64-bit, Build 9600
OS Uptime: 15 小时, 4 分, 44 秒
Time Zone: 中国标准时dll,-572, 中国夏令时.dll,-571
UTC Offset: +08:00
User Role: User
Themes: Yes (Aero) RealSystem32: Yes
System Locale ID: 2052 (zh-CN)
Thread Locale ID: 2052 (zh-CN)
Default ANSI Code Page: 936 (ANSI/OEM - 简体中文 GBK)
Active ANSI Code Page: 936 (ANSI/OEM - 简体中文 GBK)
Default OEM code page: 936 (ANSI/OEM - 简体中文 GBK)
Active OEM Code Page: 936 (ANSI/OEM - 简体中文 GBK)
DBCS Code Page: Yes
Main Contents Font: 微软雅黑 9.75
DblClick Time: 500 ms
Screen: 1920x1080, 1/1 (Primary), Virtual: (0, 0) - (1920, 1080), Work: (0, 0) - (1920, 1050)
Screen DPI: 96 (100%) twX: 15 Stretch: 1 sLF: 1 Toolbar Zoom: 1 (-1;1)
Screen Color Depth: 32
DPI awareness: Per monitor
Auto Scaling: Yes, Yes
UseDPIAwareIconSizes: No, Yes
Icon Size: Small=16, Large=32
Icon Size Controls: Small=16, Large=32
Icon Size Recommended: Small=16, Large=32
Command Line: /new
Command Normalized: /new
App: C:\EDA_Tools\XYplorer\XYplorer.exe
Ini File: C:\EDA_Tools\XYplorer\Data\XYplorer.ini
App Data Path: C:\EDA_Tools\XYplorer\Data\
Pane 1 Data Path: C:\EDA_Tools\XYplorer\Data\Panes\1\
Pane 2 Data Path: C:\EDA_Tools\XYplorer\Data\Panes\2\
Catalogs Path: C:\EDA_Tools\XYplorer\Data\Catalogs\
Icons Path: C:\EDA_Tools\XYplorer\Data\Icons\
New Items Path: C:\EDA_Tools\XYplorer\Data\NewItems\
Scripts Path: C:\EDA_Tools\XYplorer\Data\Scripts\
Thumbs Cache: C:\EDA_Tools\XYplorer\Data\Thumbnails\
Catalog: C:\EDA_Tools\XYplorer\Data\Catalogs\CatalogNew.dat
Tags Database: C:\EDA_Tools\XYplorer\Data\tag.dat
Language Support: 8.126
Language: 简体中文 (Simplified Chinese) - 8.125
Locale: 0, 1, 936 (ANSI/OEM - 简体中文 GBK), 系统默认 (936)
Translator: Alhagi Yan
Language File: C:\EDA_Tools\XYplorer\Data\ChineseSimplified.lng
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:44
Well for me the jury is still out on whether it's necessary to actually see that script in the script column. It makes for a bit of an ugly presentation and I'm not sure if it's necessary to see the script without clicking. With long file paths and ending ellipses you don't really see what's important - the filename - unless you went with middle ellipses. Seeing the red or blue dot and then clicking it would be enough for me. It's not something we'll be changing everyday once it's established.
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:50
I detached the monitor from my notebook and restarted XYplorer. There are no superfluous vertical scrollbars at all, everything works as it should. If I reattach my monitor when XY is running, the tabs remain ok. But after restart, I get the vertical scrollbars back. Is something incorrectly recognized by XY about the monitors, when there are more than one?
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:51
I find it useful. You could place a comment in front to make it more useful to you.klownboy wrote: ↑07 Dec 2020 17:44 Well for me the jury is still out on whether it's necessary to actually see that script in the script column. It makes for a bit of an ugly presentation and I'm not sure if it's necessary to see the script without clicking. With long file paths and ending ellipses you don't really see what's important - the filename - unless you went with middle ellipses. Seeing the red or blue dot and then clicking it would be enough for me. It's not something we'll be changing everyday once it's established.CEAs.jpg
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 17:52
Is the data inLittleBiG wrote: ↑07 Dec 2020 17:50I detached the monitor from my notebook and restarted XYplorer. There are no superfluous vertical scrollbars at all, everything works as it should. If I reattach my monitor when XY is running, the tabs remain ok. But after restart, I get the vertical scrollbars back. Is something incorrectly recognized by XY about the monitors, when there are more than one?
screen; all correct?Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 18:00
I cannot see the scale of the second monitor in the screen, which is 100%.admin wrote: ↑07 Dec 2020 17:52Is the data inLittleBiG wrote: ↑07 Dec 2020 17:50I detached the monitor from my notebook and restarted XYplorer. There are no superfluous vertical scrollbars at all, everything works as it should. If I reattach my monitor when XY is running, the tabs remain ok. But after restart, I get the vertical scrollbars back. Is something incorrectly recognized by XY about the monitors, when there are more than one?screen;all correct?
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 18:02
This problem happens on the 1st monitor?
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 18:09
But, FYI, I've also been thinking about a multiline tooltip (on hovering the cell) that shows the whole script (if it fits). I'm to opinions...admin wrote: ↑07 Dec 2020 17:51I find it useful. You could place a comment in front to make it more useful to you.klownboy wrote: ↑07 Dec 2020 17:44 Well for me the jury is still out on whether it's necessary to actually see that script in the script column. It makes for a bit of an ugly presentation and I'm not sure if it's necessary to see the script without clicking. With long file paths and ending ellipses you don't really see what's important - the filename - unless you went with middle ellipses. Seeing the red or blue dot and then clicking it would be enough for me. It's not something we'll be changing everyday once it's established.CEAs.jpg
Re: CAE_LocationChange, pleeeeease...
Posted: 07 Dec 2020 18:13