Page 1 of 2
Starting XY on w2k
Posted: 10 Jul 2011 15:39
by Borut
This is a mystery... I have no problems running XYplorer (for instance the last beta) on my w2k SP4 in a virtual machine (I believe I installed UR1 (Update Rollup 1) on that one several years ago too).
Today I wanted to install XYplorer on my wife's physical machine, which is also w2k SP4 (however, probably without UR1). Either after copying my portable installation verbatim, or making a clean portable installation, after start it shows the attached window- immediately. If I start it through LAN from my XP, it works as expected. Also, if started through LAN out of my virtual w2k SP4 UR1(?) machine, it works as expected.
The only other special thing I can think of about the machine where it does not work is that it uses some special HD drivers during the very early boot phase. However, I do not think that even Windows is afterwards "aware" of that.
Any ideas or similar experiences? (I know that not many people are using w2k nowadays. If not for other reason, then it would be nice to solve this just for the sake of mystery. Maybe there are some special requirements concerning w2k, which I am not aware of?)
Re: Starting XY on w2k
Posted: 10 Jul 2011 15:51
by nas8e9
Borut wrote:This is a mystery... I have no problems running XYplorer (for instance the last beta) on my w2k SP4 in a virtual machine (I believe I installed UR1 (Update Rollup 1) on that one several years ago too).
Today I wanted to install XYplorer on my wife's physical machine, which is also w2k SP4 (however, probably without UR1). Either after copying my portable installation verbatim, or making a clean portable installation, after start it shows the attached window- immediately. If I start it through LAN from my XP, it works as expected. Also, if started through LAN out of my virtual w2k SP4 UR1(?) machine, it works as expected.
The only other special thing I can think of about the machine where it does not work is that it uses some special HD drivers during the very early boot phase. However, I do not think that even Windows is afterwards "aware" of that.
Any ideas or similar experiences? (I know that not many people are using w2k nowadays. If not for other reason, then it would be nice to solve this just for the sake of mystery. Maybe there are some special requirements concerning w2k, which I am not aware of?)
You could try installing the Visual Basic 6.0 run-time from
here, which may not be part of Windows 2000 by default.
BTW, I'm aware that XYplorer is compiled to machine code, but perhaps the form engine at least, requires MSVBM60.dll. Later Windows versions (XP =>) seem to include the run-time.
Re: Starting XY on w2k
Posted: 10 Jul 2011 19:22
by Borut
Thanks, done it, but did not help. The effect remained unchanged.
Re: Starting XY on w2k
Posted: 10 Jul 2011 19:32
by nas8e9
Borut wrote:Thanks, done it, but did not help. The effect remained unchanged.
Too bad. One other component that may be missing or outdated, is the Windows GDI+ subsystem. It can be downloaded from
here.
Re: Starting XY on w2k
Posted: 10 Jul 2011 22:13
by PeterH
Borut wrote:If I start it through LAN from my XP, it works as expected. Also, if started through LAN out of my virtual w2k SP4 UR1(?) machine, it works as expected.
I just don't understand exactly what you did.
Did you mean running on the other machines the XY from the remote directory of the W2K-system, or vice versa?
And could you also try just the opposite? Just to verify!
Re: Starting XY on w2k
Posted: 11 Jul 2011 08:18
by Borut
I just don't understand exactly what you did.
Did you mean running on the other machines the XY from the remote directory of the W2K-system, or vice versa?
And could you also try just the opposite? Just to verify!
I now tried the opposite too.
Let me now reformulate: When I run XY on that particular W2K-system (SP4, probably without UR1; in the meantime with that VB6 thingy) it always produces that strange window, no matter where XY is actually located (local drive or remote network drive). On my all other systems (another W2K SP4, that probably has UR1 installed and runs in a VirtualBox; as well as two XPs) XY runs as expected (even if it is as a test loaded from a remote network drive from that particular problematic W2K).
Re: Starting XY on w2k
Posted: 11 Jul 2011 11:24
by PeterH
Borut wrote:I just don't understand exactly what you did.
Did you mean running on the other machines the XY from the remote directory of the W2K-system, or vice versa?
And could you also try just the opposite? Just to verify!
I now tried the opposite too.
Let me now reformulate: When I run XY on that particular W2K-system (SP4, probably without UR1; in the meantime with that VB6 thingy) it always produces that strange window, no matter where XY is actually located (local drive or remote network drive). On my all other systems (another W2K SP4, that probably has UR1 installed and runs in a VirtualBox; as well as two XPs) XY runs as expected (even if it is as a test loaded from a remote network drive from that particular problematic W2K).
OK - I think this means that there is something on this one system preventing XY to work as desired. Especially, as you have another W2K-system working correctly.
(This leads a bit more in the direction nas8e9 talked of.)
But sorry - no more specific idea on my side

Re: Starting XY on w2k
Posted: 11 Jul 2011 11:46
by Stefan
Borut, have you checked if other VB6 app will work?
For other VB6 apps take an look e.g. at KarenWare.
Karen is passed away now, but here side is still online.
e.g.:
http://www.karenware.com/powertools/ptdinfo.asp
Re: Starting XY on w2k
Posted: 11 Jul 2011 23:36
by Borut
Thank you Stefan. I have installed Karen's LAN monitor as a test. Works as expected.
Mystery continues...
Re: Starting XY on w2k
Posted: 12 Jul 2011 07:43
by admin
This is indeed extremely mysterious. Do you have any window spy software that can tell what kind of window class that black thing is?
Re: Starting XY on w2k
Posted: 12 Jul 2011 10:21
by Borut
Do you have any window spy software that can tell what kind of window class that black thing is?
Oh yes, now I have
WinSpy tells that it is of class Edit. Its Caption - according to WinSpy - has an interesting content:
Error: 53 (00000035)
Desc:
File not found: gdiplus.dll
Dll: 0
Proc: IB@15
Source: XYplorer
XY ver: 10.00.0005
OS: Windows 2000 (Service Pack 4), 32-bit
Date: 12.07.2011 10:12:43
Your diagnose?
Re: Starting XY on w2k
Posted: 12 Jul 2011 10:50
by admin
Ah, you might like to visit this page now:
http://www.xyplorer.com/gdiplus.htm

Re: Starting XY on w2k
Posted: 12 Jul 2011 12:38
by Borut
Thank you Don - that was the solution.
I apologize to all, if I was supposed to find that page myself. In fact, I even now do not see how one comes to that page not knowing the direct URL (could not find a link to it on support/faq page).
Re: Starting XY on w2k
Posted: 12 Jul 2011 12:50
by admin
Borut wrote: Thank you Don - that was the solution.
I apologize to all, if I was supposed to find that page myself. In fact, I even now do not see how one comes to that page not knowing the direct URL (could not find a link to it on support/faq page).
There is no link.

2 years ago I decided that no sane man will still use Win2K so I removed the link.

Re: Starting XY on w2k
Posted: 12 Jul 2011 14:16
by PeterH
admin wrote:Borut wrote: Thank you Don - that was the solution.
I apologize to all, if I was supposed to find that page myself. In fact, I even now do not see how one comes to that page not knowing the direct URL (could not find a link to it on support/faq page).
There is no link.

2 years ago I decided that no sane man will still use Win2K so I removed the link.

http://www.xyplorer.com/xyfc/viewtopic.php?f=10&t=2919 says there is only one "insane".
I'm afraid I know who that is
Borut might want to add himsef there?
@Don: When will XP-users begin to be un-sane?
