TIPS on slowness of XYplorer folder opening
Posted: 24 Sep 2026 07:21
If your folders are opening slower then you think they should I found that these steps help when troubleshooting.
If others have tips please post. I use Bitdefender as my anti-virus and after using Gemini AI and GROK AI, it seems Windows Defender and others are also the issue. Below is how to find the startup time and what may be the cause of the slowness on XYplorer's side.
TIPS: Open XYplorer>
Help> Various Information to see the Startup Time: 1,865 ms < time changes
Help> hold the CTRL button down then click on Various Information
This tells you want is turned on/off, example if folders are opening slowly.
F9 to bring up Configuration for settings.
Jump to Setting button at the bottom to do searches where a setting is such as Network. The results are clickable.
Question posted at Gemini AI and GROK AI: Bitdefender causes XYplorer folders to open slower than normal.
GROK AI: Bitdefender’s real-time protection (especially On-Access scanning / Shield and Advanced Threat Defense) is the usual cause of the extra launch delay for XYplorer, even after a basic exception. Windows Defender is lighter on process launch overhead in many cases, so ~888 ms vs ~2000 ms is a commonly reported gap. Simple file/folder exceptions often do not fully stop the behavioral/heuristic checks that slow startups.
community.bitdefender.com
Update: Added these exceptions then a restart of the pc.
Program now opens in same range as Windows Defender
Anti-Virus & Advanced Threat Defense
c:\program files (x86)\xyplorer\
c:\program files (x86)\xyplorer\xycopy.exe
c:\program files (x86)\xyplorer\xyplorer.exe
-------------------------------------------------
Since the files are on a local SSD, they should load almost instantly. The bottleneck is strictly caused by Bitdefender intercepting the active "file hooks" (file handles and properties requests) that XYplorer makes to your SSD.
Because an SSD can deliver raw file data faster than a mechanical drive, Bitdefender's real-time intercept process becomes a major queue bottleneck. To fully fix this on an SSD configuration, you need to apply Process-based exclusions instead of just basic file/folder exclusions.
Apply these three advanced fixes to open up the pipeline between your SSD and XYplorer:
1. Exclude the Active Process Hooks in Bitdefender
When you add an exclusion in Bitdefender, it defaults to checking the static files. You must explicitly tell it to ignore the live processes as they run.
1. Open Bitdefender > Go to Protection > Under Antivirus, click Open.
2. Choose Settings > Manage Exceptions.
3. Click + Add an exception.
4. Browse to your XYplorer.exe file.
5. Crucial Step: Under the checkmarks for Antivirus and Advanced Threat Defense, look for an option or dropdown to change the exception type to Process (instead of just "File").
6. Ensure Process isolation is enabled for both XYplorer.exe and XYcopy.exe.
1. Disable Folder Size Caching Conflicts in XYplorer
XYplorer aggressively calculates folder sizes in the background on SSDs. When Bitdefender sits in the middle, this calculation causes massive lag.
1. Inside XYplorer, hit F9 to open Configuration.
2. Go to Tree and List > List.
3. Under the Cache folder sizes section, uncheck Cache folder sizes.
4. Alternatively, if you want folder sizes, ensure “Update folder sizes automatically” is turned off.
5. Check for the "Muted" Antivirus Flag
You can use XYplorer's internal engine logs to verify if Bitdefender is still aggressively monitoring it:
1. In XYplorer, go to the top menu and select Help.
2. Hold down the Ctrl key on your keyboard and click Various Information.
3. Scroll down the pop-up text block until you see Anti-Virus Muted:.
If it says No, Windows and Bitdefender are still actively forcing XYplorer to wait for file permission cycles on every folder change. Re-verify that your Bitdefender process exclusions are completely active.
If others have tips please post. I use Bitdefender as my anti-virus and after using Gemini AI and GROK AI, it seems Windows Defender and others are also the issue. Below is how to find the startup time and what may be the cause of the slowness on XYplorer's side.
TIPS: Open XYplorer>
Help> Various Information to see the Startup Time: 1,865 ms < time changes
Help> hold the CTRL button down then click on Various Information
This tells you want is turned on/off, example if folders are opening slowly.
F9 to bring up Configuration for settings.
Jump to Setting button at the bottom to do searches where a setting is such as Network. The results are clickable.
Question posted at Gemini AI and GROK AI: Bitdefender causes XYplorer folders to open slower than normal.
GROK AI: Bitdefender’s real-time protection (especially On-Access scanning / Shield and Advanced Threat Defense) is the usual cause of the extra launch delay for XYplorer, even after a basic exception. Windows Defender is lighter on process launch overhead in many cases, so ~888 ms vs ~2000 ms is a commonly reported gap. Simple file/folder exceptions often do not fully stop the behavioral/heuristic checks that slow startups.
community.bitdefender.com
Update: Added these exceptions then a restart of the pc.
Program now opens in same range as Windows Defender
Anti-Virus & Advanced Threat Defense
c:\program files (x86)\xyplorer\
c:\program files (x86)\xyplorer\xycopy.exe
c:\program files (x86)\xyplorer\xyplorer.exe
-------------------------------------------------
Since the files are on a local SSD, they should load almost instantly. The bottleneck is strictly caused by Bitdefender intercepting the active "file hooks" (file handles and properties requests) that XYplorer makes to your SSD.
Because an SSD can deliver raw file data faster than a mechanical drive, Bitdefender's real-time intercept process becomes a major queue bottleneck. To fully fix this on an SSD configuration, you need to apply Process-based exclusions instead of just basic file/folder exclusions.
Apply these three advanced fixes to open up the pipeline between your SSD and XYplorer:
1. Exclude the Active Process Hooks in Bitdefender
When you add an exclusion in Bitdefender, it defaults to checking the static files. You must explicitly tell it to ignore the live processes as they run.
1. Open Bitdefender > Go to Protection > Under Antivirus, click Open.
2. Choose Settings > Manage Exceptions.
3. Click + Add an exception.
4. Browse to your XYplorer.exe file.
5. Crucial Step: Under the checkmarks for Antivirus and Advanced Threat Defense, look for an option or dropdown to change the exception type to Process (instead of just "File").
6. Ensure Process isolation is enabled for both XYplorer.exe and XYcopy.exe.
1. Disable Folder Size Caching Conflicts in XYplorer
XYplorer aggressively calculates folder sizes in the background on SSDs. When Bitdefender sits in the middle, this calculation causes massive lag.
1. Inside XYplorer, hit F9 to open Configuration.
2. Go to Tree and List > List.
3. Under the Cache folder sizes section, uncheck Cache folder sizes.
4. Alternatively, if you want folder sizes, ensure “Update folder sizes automatically” is turned off.
5. Check for the "Muted" Antivirus Flag
You can use XYplorer's internal engine logs to verify if Bitdefender is still aggressively monitoring it:
1. In XYplorer, go to the top menu and select Help.
2. Hold down the Ctrl key on your keyboard and click Various Information.
3. Scroll down the pop-up text block until you see Anti-Virus Muted:.
If it says No, Windows and Bitdefender are still actively forcing XYplorer to wait for file permission cycles on every folder change. Re-verify that your Bitdefender process exclusions are completely active.