Page 1 of 1

Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 05:48
by iaseac
Everything was just fine except when I attempted to enlarge the Hover Box in XY per the the the F1 instructions
which state: Numpad Add increase size by 10 pixels. and Numpad Subtract ... same 10 pixels. Both triggered Listary and the
Hover box remained unchanged. There was a clear conflict - IMHO.

With XY open I did the disable in the Listary. After the first trial with that and a full reboot of the PC - the hover box was lost.
Then I Changed the Default File manager from XY to the M$ one. and unchecked the xplorer2 - per the attached jpg.

The XY settings remain unchanged.
The Hover Box remains gone.

i

Re: Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 10:05
by Horst
Not believed.
Listary doesn't watch anything in your Hover box and has no influence of its display.
I ran Listary togehter with XY and there was never any problem with them.
Restore you xyplorer.ini from a backup or try a fresh ini.

Re: Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 10:16
by highend
Execute this from the address bar:
text "Value: " . getkey("HoverBoxImageSize", "FileInfoTips");
and show the output

Re: Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 18:23
by iaseac
Ran the
text "Value: " . getkey("HoverBoxImageSize", "FileInfoTips");
Got Value: 970 see attached

Re: Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 19:29
by highend
Configuration | Information | File Info Tips & Hover Box | Show Hover Box
is ticked,

the item type you're hovering over is selected in
Configuration | Information | File Info Tips & Hover Box | Show Hover Box | Select Item Types...

and the correct context is set as well?
Configuration | Information | File Info Tips & Hover Box | Show Hover Box | Select Context...

Re: Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 19:56
by iaseac
My current settings - unchanged from what worked before

Re: Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 20:22
by highend
So you are:

- Hovering over an item type that is ticked in Configuration | Information | File Info Tips & Hover Box | Show Hover Box | Select Item Types...
- Hovering over its icon
- Holding the shift key (and did this before reaching the icon with the mouse)

?

Re: Lost Hover Box - due to Conflict

Posted: 16 Jul 2021 20:57
by iaseac
Some inadvertent stupidity. Sorry for wasting some time - I'm helping a friend etc...
XY runs just fine with the "shift key". 960 x 720 approximate hower size (depending on shape of image). + and - keys on the numpad also work without the Listary conflict.

Wish list for my 4K monitors - 960 is not near 80% of the monitors. Why can the Hover box images all remain saved as a constant % of screen - and not require a constant enlarge with the + key for each image viewed?
60% of screen vertical dimension would be a good default IMHO.

(Yes I know Don is up to his a** in alligators.)

Thanks again all...
i