Page 1 of 1
Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 09:31
by bitbauer
Hi,
I'm experiencing an extreme slow startup of xy. It seems that "Layout Catalog" causes this. What can I do?
And why is "RestoreMappedNetworkDrive" not executed asynchronously? I know that this share is only available If I'm connected to my VPN. But this shouldn't prevent xy from resuming startup...
XY ver: XYplorer 21.00.0000
OS: Windows 10 Professional, 64-bit, Release 1903, Build 18362.1082
Loaded: 2020-09-15 09:19:22 in 86.071 ms
Threshold: 10 ms
0 ms: 147 ms - Start Load
154 ms: 57 ms - Load Language
220 ms: 21 ms - Init Controls
241 ms: 69 ms - Init Graphics
310 ms: 15 ms - Init Tabs
325 ms: 32 ms - Create Info Panel
357 ms: 58 ms - Set Interface Font
415 ms: 22 ms - Init Panes
440 ms: 22.018 ms - RestoreMappedNetworkDrive Z:\
22.458 ms: 12 ms - Exist Drive F:\
22.477 ms: 16 ms - Add Drive H:\
22.509 ms: 36 ms - Go Start Path: D:\
22.564 ms: 16 ms - Layout Bars
22.580 ms: 63.315 ms - Layout Catalog
85.895 ms: 78 ms - Layout List
85.973 ms: 39 ms - Show Window
86.012 ms: 58 ms - Layout List
86.071 ms: - Load Done
MaxiTree: Rows=20, Nodes=20, Expanded=1, Mapped Drives=7
Remember Tree State: Yes (1 stored paths)
Check Existence of Subfolders in Tree: Yes
Pane 1: Items=0/0, Network, Pane 2: Items=21/21, Catalog: Items=36
Thanks for your help!
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 10:04
by highend
And why is "RestoreMappedNetworkDrive" not executed asynchronously?
No threading.
Anything in your catalog that points to network drives?
Did you already try Configuration | General | Startup & Exit | [x] No network browsing on startup?
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 10:38
by admin
And untick this:
Configuration | General | Startup & Exit | Reconnect mapped network drives on startup
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 12:05
by bitbauer
highend wrote: ↑15 Sep 2020 10:04
And why is "RestoreMappedNetworkDrive" not executed asynchronously?
No threading.
Yes, I know, but why not?
highend wrote: ↑15 Sep 2020 10:04
And why is "RestoreMappedNetworkDrive" not executed asynchronously?
Anything in your catalog that points to network drives?
Yes, a lot! Almost every item ;-) But this should not have any impact on the startup performance...
highend wrote: ↑15 Sep 2020 10:04
And why is "RestoreMappedNetworkDrive" not executed asynchronously?
Did you already try Configuration | General | Startup & Exit | [x] No network browsing on startup?
yes, the checkbox was already checked.
"Layout Catalog" still needs 63 secs to start! What is "Layout Catalog" responsible for?
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 12:08
by bitbauer
admin wrote: ↑15 Sep 2020 10:38
And
untick this:
Configuration | General | Startup & Exit | Reconnect mapped network drives on startup
Did not make any difference :-( At least for the "Layout Catalog" performance...
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 12:17
by admin
bitbauer wrote: ↑15 Sep 2020 12:08
admin wrote: ↑15 Sep 2020 10:38
And
untick this:
Configuration | General | Startup & Exit | Reconnect mapped network drives on startup
Did not make any difference :-( At least for the "Layout Catalog" performance...
That was for the RestoreMappedNetworkDrive performance.
"Layout Catalog" still needs 63 secs to start! What is "Layout Catalog" responsible for?
Hmm, these huge lags can ONLY come from network. What kind of items in your Catalog are these?
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 12:27
by bitbauer
admin wrote: ↑15 Sep 2020 12:17
Hmm, these huge lags can ONLY come from network. What kind of items in your Catalog are these?
Quite normal references to network shares. If I open them in Windows Explorer they show up almost immediately. Even if I click on one of the network locations in xy it lasts up to 60 seconds to get a response. During that I'm not able to use xy anymore.
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 13:34
by admin
bitbauer wrote: ↑15 Sep 2020 12:27
admin wrote: ↑15 Sep 2020 12:17
Hmm, these huge lags can ONLY come from network. What kind of items in your Catalog are these?
Quite normal references to network shares. If I open them in Windows Explorer they show up almost immediately. Even if I click on one of the network locations in xy it lasts up to 60 seconds to get a response. During that I'm not able to use xy anymore.
Strange. All those network lag issues have been solved years ago for most users. There must be something special about your system. I will look at it next week (with your help). In the meantime you can play with the settings under
Configuration | General | Safety Belts, Network | Network. Especially
Fast network enumeration can make a big difference. Under Win10 it should be unticked.
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 14:53
by bitbauer
Ok, I just updated Windows 10 from version 1909 to 2004 (finally). Don't know if this had to do with the issue but now it works a lot faster...
XY ver: XYplorer 21.00.0000
OS: Windows 10 Professional, 64-bit, Release 2004, Build 19041.508
Loaded: 2020-09-15 14:49:09 in 913 ms
Threshold: 10 ms
0 ms: 157 ms - Start Load
157 ms: 22 ms - Init Language
179 ms: 79 ms - Load Language
258 ms: 13 ms - Load Settings
276 ms: 20 ms - Init Controls
296 ms: 69 ms - Init Graphics
365 ms: 16 ms - Init Tabs
381 ms: 34 ms - Create Info Panel
415 ms: 63 ms - Set Interface Font
478 ms: 31 ms - Init Panes
520 ms: 28 ms - Add Drive H:\
559 ms: 19 ms - Tab Icon Check: \\ats4055\inetpub\wwwroot\
613 ms: 26 ms - Go Start Path: Dieser PC
639 ms: 11 ms - Init UDC and KS
656 ms: 13 ms - Tab Icon Check: \\ats4055\inetpub\wwwroot\
672 ms: 31 ms - Layout Bars
703 ms: 93 ms - Layout Catalog
796 ms: 11 ms - Layout List
807 ms: 50 ms - Show Window
863 ms: 47 ms - Layout List
913 ms: - Load Done
MaxiTree: Rows=50, Nodes=50, Expanded=4, Mapped Drives=7, Servers=6
Remember Tree State: Yes (5 stored paths)
Check Existence of Subfolders in Tree: Yes
Pane 1: Items=0/0, Network, Pane 2: Items=0/0, Network, Catalog: Items=35
Please consider this problem as solved...otherwise I will come back and report
Thanks for your help!
Re: Slow startup due to "Layout Catalog"
Posted: 15 Sep 2020 17:45
by admin
Sometimes Windows just needs a reboot. That's an eternal truth it seems.