XYplorer Beta Club

Posted: **06 May 2015 22:14**

This is all there is within the startup.ini file.

[Appdata]
C:\program_settings\XYplorer

Posted: **07 May 2015 08:15**

It's a bad startup.ini file.
XYplorer won't accept it, and should default to "C:\Program Files (x86)\XYplorer\Data" (which is not usually writable) .
But how does XY take this as <xydata> path: "C:\Custom Program Settings\XYplorer\" ?

I think you have >= two different XYplorer installations...

Posted: **07 May 2015 11:38**

SammaySarkar wrote:It's a bad startup.ini file.
XYplorer won't accept it, and should default to "C:\Program Files (x86)\XYplorer\Data" (which is not usually writable) .
But how does XY take this as <xydata> path: "C:\Custom Program Settings\XYplorer\" ?

I think you have >= two different XYplorer installations...

Awaiting correct syntax I didn't see the missing Path=

Maybe it's a typo?
(As the specified path seems to be that of his "Various Information".)

Still I have no idea where the file name Christophers_XYplorer_Settings.ini originates. And no more idea where to look...

Posted: **07 May 2015 14:36**

PeterH wrote:Maybe it's a typo?
(As the specified path seems to be that of his "Various Information".)

But it stops at only seeming to be!

I'm sure that startup.ini is not affecting anything there. (unless it's a typo)

Posted: **07 May 2015 23:50**

Just happened to see - please have a look at file lastini.dat in XYdata.

Posted: **08 May 2015 21:55**

I don't know if you guys are having a conversation amongst yourself, or there is something you want me to do ?

If there is a question, which I'm guessing is from PeterH, is that question, you want me to look at the lastini.dat file ?

Posted: **08 May 2015 22:21**

CookieMonster wrote:I don't know if you guys are having a conversation amongst yourself, or there is something you want me to do ? If there is a question, which I'm guessing is from PeterH, is that question, you want me to look at the lastini.dat file ?

Yes,

PeterH wrote:... - please have a look at file lastini.dat in XYdata.

I think contents is short enough

to copy it here.

Posted: **09 May 2015 00:58**

The lastini.dat file reads;

Christophers_XYplorer_Settings, that is all !

Posted: **09 May 2015 01:46**

CookieMonster wrote:The lastini.dat file reads;

Christophers_XYplorer_Settings, that is all !

Hm - before Sammay and I talked about your startup.ini: you reported

CookieMonster wrote:This is all there is within the startup.ini file.
[Appdata]
C:\program_settings\XYplorer

I said you *might* have had a typo, so that it really was:

[Appdata]
Path=C:\program_settings\XYplorer

Is it so that you missed the Path= in that file?

If it's so, and the contents of your lastini.dat specifies the current ini to use, then we (at least I) finally understand why your used ini is
C:\program_settings\XYplorer\Christophers_XYplorer_Settings.ini

Sorry to say: now it's too late to continue - I think we will have another look at it tomorrow.

Posted: **09 May 2015 03:54**

It is a custom path that you can do for XYplorer, which you probably already know. Remember lets not loose track of the goal, which is why CEA_ListRightClickONWhite does not list above all the functions up to including, or maybe beyond 6 in my XYplorer.ini file.

Posted: **09 May 2015 11:45**

CookieMonster wrote:It is a custom path that you can do for XYplorer, which you probably already know. Remember lets not loose track of the goal, which is why CEA_ListRightClickONWhite does not list above all the functions up to including, or maybe beyond 6 in my XYplorer.ini file.

In the moment I think it's not in xyplorer.ini, but in C:\program_settings\XYplorer\Christophers_XYplorer_Settings.ini - could you have a look?

Seems to me your xyplorer.ini currently is "redirected" to Christophers version. Then the XY changes will be there, too.

Posted: **09 May 2015 13:48**

There is no .ini file in /program_settings/XYplorer, there isn't even a folder in /program_settings labeled xyplorer !

PeterH wrote:
CookieMonster wrote:It is a custom path that you can do for XYplorer, which you probably already know. Remember lets not loose track of the goal, which is why CEA_ListRightClickONWhite does not list above all the functions up to including, or maybe beyond 6 in my XYplorer.ini file.
In the moment I think it's not in xyplorer.ini, but in C:\program_settings\XYplorer\Christophers_XYplorer_Settings.ini - could you have a look?

Seems to me your xyplorer.ini currently is "redirected" to Christophers version. Then the XY changes will be there, too.

Posted: **09 May 2015 21:25**

OK: I wrongly assumed (from your listing of startup.ini) that your Appdata folder would be C:\program_settings\XYplorer

So please verify the contents of the startup.ini, located in the same folder as the executed XYplorer.exe - is it really

Code: Select all

[Appdata]
C:\program_settings\XYplorer

this 1) is bad syntax as the 2nd line should start with Path=, and it 2) points to a folder differing from what your "Various Information" shows.

And please enter
..echo %appdata%
into the XY Address Bar, and show the result.

If these tests don't shed a light on the situation I'm afraid I have no more ideas...

Posted: **11 May 2015 06:56**

That is the correct syntax which is in my startup.ini file located in my custom preference folder, the folder in which you can tell xy to place all your preferences, but the startup.ini file located in C:\Program Files (x86)\XYplorer reads;

Code: Select all

[Appdata]
Path=C:\Custom Program Settings\XYplorer

And please enter
..echo %appdata%
into the XY Address Bar, and show the result.

This command produced an error; that error being;
Could not find:

Code: Select all

..echo C:\User\Christopher\AppData\Roaming

Posted: **11 May 2015 11:27**

OK: no syntax error on your side now, and other path than before.

So we now know, that and why your ini should be (and is shown as):
C:\Custom Program Settings\XYplorer\Christophers_XYplorer_Settings.ini
- and we can forget my typo

::echo %appdata% would have been correct. But no matter, as your [Appdata] now shows a valid path.

Now you wrote, that after Save Settings the aforementioned file does not show CEA_TreeRightClickOnWhite - that's strange. Is your current user allowed to write the ini file / to that folder?

Please look at and remember: in that file, of section [General], the entries starting with Win... (all rather at the top.) Then:
If you change size and location of your XY window, save settings, close and reopen XY: is it opened at the old or at the new location? Check the values seen in the ini file: changed?

You might want XY to use the default ini filename again? In XY:
- click File / Settings Special / Save Configuration as...
- your folder C:\Custom Program Settings\XYplorer should be shown
- select XYplorer.ini
This should save your current settings to XYplorer.ini again, and change lastini.dat to point to XYplorer[.ini.]
Compare Christophers_XYplorer_Settings.ini and XYplorer.ini :
- different or not?
- CEA_TreeRightClickOnWhite to be found in either?

OK: curious for results...

XYplorer Beta Club

How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?

Re: How to enable CEA_ListRightClickOnWhite=6 ?