Code: Select all
XYplorer Beta Club
v5.00.0023 - 19.06.06 09:59
+ Menu View/Tab/Tab List...: added keyboard shortcut Ctrl+Shift+T.
When open via keyboard the menu position is the lower left control
corner if the control is visible else mouse cursor position.
! Another attempt to fix the Thunderbird issue...
Code: Select all
v5.00.0024 - 20.06.06 09:26
! When opening a LNK file by dbl-click, any target parameters have
been ignored. Fixed.
Code: Select all
v5.00.0025 - 23.06.06 10:13
* Removed "Slow double-click invokes single-rename" from
Configuration. This behavior now can and has to be set individually
for Tree and List. Use menu View/Tree[List] Style/Rename On Slow
Double-Click.
Code: Select all
v5.00.0026 - 27.06.06 12:06
! With "Sort folders apart" turned off various irritating little
glitches could happen after a file rename and as well after updating
a find results listing (after e.g. moving one of the found items to
a new folder). Fixed.
! Opening a sub-folder inside a locked tab while browsing is not yet
completed (e.g. due to calculating folder sizes) would overwrite the
locked tab's location. Fixed.
Code: Select all
v5.00.0027 - 28.06.06 11:06
+++ Network Places On Demand: now you can browse to servers outside
the local/primary workgroup/domain. Simply enter them (or items
located on them) into the Address Bar, or browse to them via Catalog
or Favorites. If reachable they will be automatically/on-the-fly added
the nethood (My Network Places) node in the tree.
Note: at the moment you cannot yet startup on network paths
outside the local domain. I'm still meditating about the best
solution here...
* Browsing to favorites (or favorite files) from menu is now
channeled through the same procedures as opening a destination via
Catalog or Address Bar. This means the prompt "Remove it from
Favorites?" on non-existance is gone (no problem since we have
list management).
+ Copy/Move Here to New Subfolder (drag'n'drop context menu): if the
subfolder already exists you are now prompted whether you still
want to copy/move the selected items there.
Code: Select all
v5.00.0028 - 29.06.06 10:58
+ Menu View/Fonts/Dialogs...: now you can configure the dialogs'
font name. Before it was hard-coded to Verdana. Note that you
cannot change the attributes (bold, italic) and the font size
(fixed to 8, resp. 8.25).
* The tab headers' font is now the same as Tree, List, etc.
Code: Select all
v5.00.0029 - 30.06.06 10:42
+ Info Panel/Properties: now the (file attributes) System checkbox
is enabled. So you can set/unset the SYSTEM flag of items at will.
Handle with care, since the SYSTEM flag is rather supposed to be set
by the system, not by the user...
+ Configuration/General: added checkbox "Show system files and
folders". Unchecking this checkbox will hide all items with the
SYSTEM attribute set (regardless of the HIDDEN attribute and the
setting of the "Show hidden..." checkbox).
Code: Select all
v5.00.0030 - 30.06.06 22:29
+ Now network servers are remembered between sessions!
This means:
(a) Network servers load at the speed of light.
(b) Servers outside the primary workgroup that have been entered
via Address Bar are now remembered and don't have to be
entered again.
To refresh this server cache select My Network Places in the tree
and press F4 or F5. This will rebrowse the network and list all
servers in the primary workgroup that are currently reachable.
Code: Select all
v5.00.0032 - 03.07.06 12:46
+ Added menu View/Font/Interface...: now you can configure the
font used in interface areas like Info Panel, Status bar, and the
Configuration window. Before it was hard-coded to "MS Sans Serif".
Note:
- Setting any font other than "MS Sans Serif" (which is the preset
default) will slow down startup a bit.
- Many fonts will be too wide for this job and just destroy the
layout. A good choice might be "Tahoma", which displays better
on TFTs and is ClearType-able.
- You cannot change the font attributes (bold, italic) and size
(fixed to 8, resp. 8.25).
- If you select fonts that are bold or italic intrinsically
your selection will be ignored.
* Interface font: on a fresh installation XYplorer will now default
to Verdana for dialogs and Tahoma for all the rest.
+ Now you may start the app minimized (resp. the minimzed state is
remembered between sessions).
+ Menu Tools, List Management: added "Servers in My Network Places".
Here you can easily add/remove servers to/from the network
neighborhood.
Remember: this is just a list of strings; there's no
test whether these servers actually exist and are reachable.
Note: you may enter servers without leading "\\". It's silently
auto-added later.
Code: Select all
v5.00.0035 - 04.07.06 10:59
* The tab headers' font is now set via menu View/Font/Interface.
! A hidden Info Panel was partly shown after setting the Interface
font. Fixed.
! Fixed a number of glitches with the new fontability.
- Removed menu Window/Always On Top. It was buggy and useless, a
deadly combination.
Code: Select all
v5.00.0037 - 05.07.06 18:34
% Browsing "My Network Places": The servers listing in file view now
leaves the Comments column empty. Makes it much faster if you have a
lot of servers. I might make this configurable later...
+ The catalog now automagically updates its icons as appropriate
when a removable drive is either connected or disconnected.
Similarly, the current tab's icon and content is automagically
updated as appropriate.
Code: Select all
v5.00.0038 - 07.07.06 17:44
+ System files/folders are now displayed in full red.
Hard-coded & experimental. Let's see if we like it...
+ Compressed files/folders are now displayed in full blue.
Hard-coded & experimental. Let's see if we like it...
+ Tree view: added MiddleClick to "Open in New Tab"; equivalent to
Shift+LeftClick.
Code: Select all
v5.00.0040 - 08.07.06 12:52
+++ Configuration/Colors/Color Filters: added color coding by file
attributes, i.e. by attribute- controlled color filters. You add an
attribute pattern by simply adding the name of the attribute, preceded
by a forward slash, to the color filters list (tip: stating the first
letter is enough; case is ignored).
These are the available attributes:
/readonly (or /r) -> matches all items with READONLY set
/hidden (or /h) -> matches all items with HIDDEN set
/system (or /s) -> matches all items with SYSTEM set
/directory (or /d) -> matches all items with DIRECTORY set
/archive (or /a) -> matches all items with ARCHIVE set
/normal (or /n) -> matches all items with NORMAL set
/temporary (or /t) -> matches all items with TEMPORARY set
/compressed (or /c) -> matches all items with COMPRESSED set
Attribute patterns can be freely OR-combined with each other and
with name patterns into one filter definition, e.g.:
/c;/r -> matches all items that are compressed or readonly
/d;*.txt -> matches all directories and TXT files
Note that all filter-controlled color-coding is confined to the
list view and does not show in the tree view.
+ Configuration/Colors/Color Filters: now the filters can be
in/excluded individually.
Code: Select all
v5.00.0043 - 09.07.06 12:28
! Catalog: dbl-clicking an item (currently a non-functional
activity, apart from expanding/collapsing categories, which
actually works now) would remove any selection, and a subsequent
<enter> would crash the app. Fixed.
+ Catalog: added MiddleClick to "Open in New Tab"; equivalent to
Shift+LeftClick.
+ Now checkboxes in checkable lists finally *look* disabled if the
lists *are* disabled. Try for example Configuration/Colors/Apply
checked color filters.
Code: Select all
v5.00.0044 - 10.07.06 12:16
+ Menu Edit: added command "Search Templates... (Ctrl+F9)", hereby
also available in the list's white space context menu.
The same command is repeated in menu Tools.
+ Configuration/Advanced: added option to "Activate left tab on
closing current". If unchecked then the tab to the right of the
current tab is activated (selected) when the current is closed.
* List view: if you have grid lines turned on the grid now is drawn
only in lines containing data.
! Catalog: MiddleClick to "Open in New Tab" now actually works.