Code: Select all
XYplorer Beta Club
v7.90.0084 - 2009-01-30 14:10
+ Visual Filter: Now you can define a filter to apply only to
folders yet show all files. Simply prefix "*|" to the pattern. For
example, to show only folders beginning with "a" and all files:
*|a*
To show all files but no folders:
*|!*
* Updated the help file.
Code: Select all
v7.90.0085 - 2009-01-31 11:47
+ Visual Filter: To hide all folders simply prefix "!\|" to the
pattern(s). For example:
!\|a* -> Hide all folders and show only files with a*
!\|* -> Hide all folders and show all files
Code: Select all
v7.90.0086 - 2009-02-01 10:06
* SC report: Now field {fullname} returns just "C:" for drive C:
(etc.), i.e. a usable path spec. Before it returned an unusable
combination of MyComputer and the drive's caption.
! SC delete: Did not delete items (in itemlist) containing
wildcards anymore. Fixed.
Delete all INI and BAK files in E:\Folder:
delete 1, 1, "E:\Folder\*.tmp | E:\Folder\*.bak";
Code: Select all
v7.90.0087 - 2009-02-01 13:23
* Startup: Added a warning message if you are downgrading (EXE older
than last INI).
! File Info Tips appeared over columns other than Name since some
versions ago. Fixed.
Code: Select all
v7.90.0100 - 2009-02-02 12:00
= NEW OFFICIAL RELEASE. Main changes since last release:
+++ Tags and Comments. Now you can assign tags and comments to your
files and folders.
+++ Visual Filters. Now you can define any filter to apply only to
files yet show or hide all folders.
+++ Scripting. Now the so-called Heredoc syntax is supported.
v7.90.0100 - 2009-02-02 12:00
+ Added tweak to fix, or rather workaround, a strange caret position
error in Tree/List inline rename with Unicode characters, aka
"Chinese odd thing".
[General]
FixOddThing=1
Note that with this workaround you may notice a horizontal
misalignment of text when pasting into inline rename boxes. It's
harmless but cosmetically unsatisfying.
Code: Select all
v7.90.0101 - 2009-02-04 10:38
* Column-Click Tagging: Now, when using the right button, there's a
temporary focus rect marking the field about to be set.
* Tabs: Slight change in icon retrieval for tabs pointing to network
locations. Might speed it up for unavailable network locations.
* HTML preview: If you attempt to close the preview window using
JavaScript "window.close();" you will be stopped and see the
message: "Closing the preview window is not allowed."
! FVS and Locked tabs: A tab that was auto-selected due to the
locked condition of the current tab received the FVS style of its
location instead of the tab's stored style, so the rule "tab style
overwrites FVS style" was broken. Fixed.
Code: Select all
v7.90.0102 - 2009-02-05 10:21
* SC loadtree: Now only existing paths are accepted in the pathlist
argument, but any existing *files* at the end of the paths are
ignored.
* Configuration | Tags: Now you cannot move the list positions of
the tag schemes anymore. Also deletion works only on the last item
of the list. This way the index order of the existing tags is
always maintained.
+ Added tweak to generally force generic icons for network locations
anywhere in the interface:
[Settings]
GenericIconsForNetworkLocations=1
While aesthetically not very satisfying, this will improve
performance for users that often have tabs or UDCs pointing to
unavailable network locations.
Code: Select all
v7.90.0105 - 2009-02-06 11:39
+ Configuration | Tabs: Added option "Cycle tabs in recently used
order". Enable it to cycle the tabs based on the usage sequence
(aka MRU) instead of the left-to-right position.
The cycle functions are these:
Miscellaneous / Tab Functions /
Cycle Tabs Backward: Ctrl+Shift+Tab; MouseWheel Up
Cycle Tabs Forward: Ctrl+Tab; MouseWheel Down
Cycle Tabs Backward, Delay Browsing: Ctrl+PageUp
Cycle Tabs Forward, Delay Browsing: Ctrl+PageDown
Note that going by MRU has the usual "history" logic: If you go
backward from A to B, then to return to A you have to go *forward*
(not backward again).
+ SC seltab enhanced: Added argument mru.
Syntax: seltab [position], [mru]
mru: 0 = left-right-order
1 = recently used order
only applied if position is relative: "+" or "-"
Examples:
::seltab "+", 1 = select the next tab, use MRU
::seltab "-", 1 = select the previous tab, use MRU
! Tags: Database was not correctly updated with partially completed
file operations, i.e. when you aborted the process at some point.
Fixed.
! Since 2009-01-27 the app would easily crash when sorting
Search Results by Path AND "Show relative path in search results"
was enabled. Fixed.
! FVS and Locked tabs: If the Default tab was auto-selected due to
the locked condition of the current tab it did not receive the FVS
style of its location instead of the tab's stored style. However, in
case of the Default tab the folder style should overwrite the tab
style. Fixed.
Code: Select all
v7.90.0106 - 2009-02-07 10:21
+ Tree: Now you can freely (in one-pixel steps between a lower and
an upper limit) change the node indent using Shift+MouseWheel over
the Tree.
Shift+MouseWheel Up (away from you): decrease indent
Shift+MouseWheel Down (towards you): increase indent
In Tree style "Narrow Tree" the setting is ignored.
Code: Select all
v7.90.0107 - 2009-02-09 14:43
* File Find: Now by default Junctions are NOT recursed on a
recursive File Find (when "Include subfolders" is ticked). To
enable recursing Junctions see the tweak below.
+ Added tweak to allow recursing Junctions on a File Find:
[Settings]
FindFollowJunctions=1
Set to 1 to recurse Junctions. On demand I will raise this tweak
to config level.
* Configuration | Tabs: Now with "Activate left tab on closing
current" AND "Cycle tabs in recently used order" both enabled, the
*previously used tab* is auto-selected on closing the current tab.
* Menu Go | Drives...: Now only existing drives are shown in the
popup. Empty removable and unaccessible network drives are skipped.
! Cycling tabs in recently used order could get slightly confused
after tabs were removed. Fixed.
* Startup: Before, if called with /ini or /win switch a 2nd instance
was loaded always (regardless of any settings concerning this).
Now, this is true only for /ini. So now you can run XY with the
/win switch and still reuse any existing instance (of course, the
/win switch is ignored then).
! PFA: Little glitch with quotes in definitions. Now you can do
things like this and it works as expected:
|\>"C:\Programme\WinMerge\WinMergeU.exe" "<item1>" "<clipboard>"
Code: Select all
v7.90.0116 - 2009-02-10 21:45
! SC md5: Had a problem (at least under some locales) with certain
input characters (e.g. ANSI 138 = Š) because of inherent codepage
related conversions. As a result md5() calculations of binary
files were likely to return wrong results. Fixed.
En passant md5 got a tad faster.
* Cycling tabs in recently used order: Now, when you are on the most
recent tab, Ctrl+Tab will not wrap around anymore but go backward.
This allows you to jump back and forth between the 2 most recent
tabs with one key combination.
! Fixed recent issues related to the /win switch changes in
v7.90.0107.
Code: Select all
v7.90.0117 - 2009-02-11 12:49
+ Added tweak to define a hotkey to show (restore, foreground) the
application when it's in the background, minimized to taskbar, or
minimized to tray.
[Settings]
HotKeyShowApp=X
Set to one character (A-Z, 0-9). The character/key will be used
together with "Win"-key, so the above example would create the
hotkey Win+X to show XY.
Note that such a hotkey does not change your system or registry.
It is active only as long as XYplorer is loaded.
If more than one XYplorer instance using the same hotkey is loaded
then only the first loaded one receives the hotkey. Even if it is
unloaded later, no other still loaded instance will respond to the
hotkey.
Code: Select all
v7.90.0118 - 2009-02-11 15:48
! File Tags: Tagging did not work correctly in Search Results.
Fixed.
Code: Select all
v7.90.0121 - 2009-02-13 10:56
+ Enhanced tweak HotKeyShowApp. Now you can state the modifier keys
using the following values:
ALT = 1
CTRL = 2
SHIFT = 4
WIN = 8
Simply add the values you need and prefix them to the key
separated by a "+". E.g. like this for Win+Alt+Y:
[Settings]
HotKeyShowApp=9+Y
If no modifier is stated, the modifer defaults to 8 (Win Key).
+ Scripting got a new function.
Name: asc
Action: Returns the ASCII value of a character.
This function complements chr().
Syntax: asc(string)
string: character
If string is larger than one character the first
character used.
If string is empty asc() returns "" (empty).
return: ASCII value, range 0-65535 (0xFFFF)
Examples:
::echo asc("a"); //97
::echo asc(chr(20000)); //20000
v7.90.0120 - 2009-02-12 12:00
= MAINTENANCE RELEASE.
+++ Bug fixes related to Tags and Comments.
Code: Select all
v7.90.0122 - 2009-02-13 16:07
+ Menu View | Mini Tree: Added two further commands that allow you
to set and later load a Favorite Mini Tree:
- Set As Favorite Mini Tree...
Stores the current Mini Tree as Favorite Mini Tree. Overwrites
any previously stored Favorite Mini Tree (after OK-ing a
prompt).
Only available/applicable in Mini Tree mode.
- Load Favorite Mini Tree
Loads any previously stored Favorite Mini Tree. Turns on Mini
Tree mode if necessary.
The Favorite Mini Tree is stored between sessions, of course.
The commands are as well featured in the TB button's context menu.
+ File Tags: Added command "Select All "[Tag Name]"" to the context
menu of toolbar button Tags and to the Tag column right-click
menu. Gives you a comfortable way to select a group of files based
on their tags and the tag of the currently focused item (resp. the
clicked item in case of the column context menu).
Note that some other file managers offer various sorts of sticky
selection, or checkbox controlled selection. So now XYplorer has
"Sticky Selection Deluxe"... :)