Download: https://www.xyplorer.com/download.php
Code: Select all
v21.40.0100 - 2020-12-30 18:00
= MAINTENANCE RELEASE.
+++ Minor bug fixes and enhancements.
Code: Select all
v21.40.0100 - 2020-12-30 18:00
= MAINTENANCE RELEASE.
+++ Minor bug fixes and enhancements.
Code: Select all
v21.40.0101 - 2021-01-01 18:12
+ Custom Copy: Now the progress dialog shows the amount of used space (and
implicitly free space) on the target drive, graphically and in numbers.
* XYcopy: Updated to 2.10.0160.
Code: Select all
v21.40.0102 - 2021-01-02 12:20
* Custom Copy: Slightly redesigned the new used space information.
* XYcopy: Updated to 2.10.0161.
Code: Select all
v21.40.0103 - 2021-01-03 12:47
+ Find Files and Quick Search: Added switch /i by which the search results
are inverted, i.e. all items are shown that do NOT match the pattern. It
corresponds to the Invert checkbox on Info Panel | Find Files | Name &
Location.
Examples:
sweet match anything sweet
sweet /i match anything not sweet
Remark:
The /types switch cannot be inverted by /i or by the Invert checkbox.
For this use the new switch /itypes (see below).
+ Find Files and Quick Search: Added switch /itypes by which you define a
list of file types (via extension) that shall NOT be returned by the
search. In other words, it's the inverted version of the /types switch.
- Syntax and options are identical to the /types switch.
- If you use /types and /itypes in the same search the right-most one will
win so there is no point in doing this.
Example:
b* /itypes=zip;rar return all items starting with "b" but not of those types
+ Configuration | Find and Filter | Filters & Type Ahead Find | Visual
Filters: Added option "Enable extended pattern matching". Tick it to allow
! for Boolean Not, and # for digits in Visual Filters.
You can escape the ! by putting a \ before it.
Examples:
sweet match anything sweet
!sweet match anything not sweet
\!sweet match anything !sweet
!\!sweet match anything not !sweet
Remarks:
- This setting raises the tweak VFExtendedPatternMatching (v20.70.0018 -
2020-02-10 14:24) to the GUI.
- But other than the previous tweak now it only applies to Visual
Filters, not to Live Filters (it gets its setting, see below).
- The setting is also found in the right-click menu of the Visual Filter
toolbar buttons.
- The factory default (and previously hard-coded behavior) is ON.
+ Configuration | Find and Filter | Filters & Type Ahead Find | Live Filter
Box: Added option "Enable extended pattern matching". Tick it to allow
! for Boolean Not, and # for digits in Live Filters.
You can escape the ! by putting a \ before it.
Examples:
sweet match anything sweet
!sweet match anything not sweet
\!sweet match anything !sweet
!\!sweet match anything not !sweet
Remarks:
- This setting replaces the tweak VFExtendedPatternMatching (v20.70.0018 -
2020-02-10 14:24) which previously applied to Live Filters only. Now
Visual Filters and Live Filters have separate settings here.
- The setting is also found in the right-click menu of the Live Filter
Box icon.
- The factory default is OFF.
* MLS: Internally updated to version 8.127.
> TRANSLATORS: Please wait until Reference_8.127.lng is uploaded.
You will be notified if you have subscribed to this thread:
https://www.xyplorer.com/xyfc/viewtopic.php?f=12&t=9648
* Custom Copy: The Used Space bar tooltip now shows the path of the actually
polled drive. In some contexts (junctions, mounted drives, network drives)
this can be interesting.
* XYcopy: Updated to 2.10.0162.
Code: Select all
v21.40.0104 - 2021-01-04 10:47
* XYcopy: Updated to 2.10.0163.
! Custom Copy: Progress dialog did not support font size 11.25 very well.
Fixed. Higher sizes will begin to break it. If you need higher sizes you
should use the Windows display settings.
Code: Select all
v21.40.0105 - 2021-01-05 21:22
* Shell Context Menu: Since v21.30.0050 - 2020-12-20 15:57 it's not shown
anymore for the targets of links (shortcuts) to network locations. From
now on, this is only in effect if the tweak NetworkPrecheckServers is set
to 1.
* Hover Box: Since v21.30.0050 - 2020-12-20 15:57 it's not shown anymore for
the targets of links (shortcuts) to network locations. From now on, this
is only in effect if the tweak NetworkPrecheckServers is set to 1.
+ SC getpathcomponent(), gpc(): Added component value "lext" to return the
extension in lower case.
For example, to toggle webp/jpg extensions, this script works with *.JPG
and *.jpg files, and with *.WEBP and *.webp files:
if (gpc(,"lext")=="webp") {renameitem("*.jpg")} elseif (gpc(,"lext")=="jpg") {renameitem("*.webp")};
* SC get(): Now get("curitem", "lext") can be used to return the extension
in lower case.
echo get("curitem", "ext"); //original case
echo get("curitem", "lext"); //lower case
Code: Select all
v21.40.0106 - 2021-01-06 13:32
+++ Hover Box | Text Files: Now you can keyboard-scroll the text within a
Hover Box if there is more text than fits in the box.
- Supported keys: Down, Up, PageDown, PageUp, End, Home.
- PageDown/PageUp scroll by 12 lines.
- If the file is larger than 200 KB you can scroll through the first 100
KB and the last 100 KB only (use End and Home to jump between those
chunks). I think that's more than enough, after all Hover Box is just
about a quick visual check.
Notes:
- There is still an issue when the file has long lines that wrap. In that
case you currently cannot scroll down enough to see the bottom of the
file. Still thinking about this...
- Key input into the Hover Box does not work when the focus is in an edit
box (it grabs all keys), eg in the Address Bar. However, you can use TAB
while the Hover Box is open to escape the edit box, and then scroll.
Code: Select all
v21.40.0107 - 2021-01-06 19:09
* Hover Box | Text Scrolling: Decreased the chunk size to 32 KB. It's enough
and speed matters as well.
! Hover Box | Text Scrolling: There was an issue with files that had long
lines that would wrap. Fixed. This fix also makes scrolling faster.
! Hover Box | Text Scrolling: Fixed various minor glitches.
Code: Select all
v21.40.0108 - 2021-01-07 13:10
+ Hover Box | Text Scrolling: Now it supports the mouse wheel. Works like
pageUp/pageDown in the Hover Box: 12 lines up or down. Note that it also
wheels the box when the mouse pointer is not over the box. Cool!
+ Hover Box | Text Scrolling: Now a subtle visual scrollbar at the right
margin of the box tells you where about in the file you currently are.
Code: Select all
v21.40.0109 - 2021-01-07 13:38
! Hover Box | Text Scrolling: Width issue with other Hover Boxes. Fixed.
Code: Select all
v21.40.0110 - 2021-01-07 19:37
+ Hover Box | Text Scrolling: Now it also works for Office files and Web
files if the Hover Box shows the extracted text.
+ Hover Box | Text: While the Hover Box is showing text you now can toggle
word wrap by pressing the "W" key. Remembered across sessions.
- If word wrap is enabled (factory default) the maximum width of the box is
about half the width of the screen.
- If word wrap is disabled (factory default) the maximum width of the box is
about 2/3 the width of the screen.
- If word wrap is disabled longer lines will simply disappear at the right
edge, without any ellipsis dots.
- On toggling word wrap the scroll position will jump back to top.
! Hover Box | Text Scrolling: Fixed countless little bugs.
Code: Select all
v21.40.0111 - 2021-01-08 17:12
+++ Hover Box | Folder Contents Preview: Now you can keyboard- and
wheel-scroll the contents of the box. Contents of zips as well. Madness!
* Hover Box | Folder Contents Preview: Now it honors "Configuration | Colors
and Styles | Styles | Columns | Truncate filenames in the middle".
! Hover Box | Text Scrolling: Fixed another bunch of buggies.
Code: Select all
v21.40.0112 - 2021-01-08 18:21
! Hover Box | Folder Contents Preview: You could crash v21.40.0111 when
quickly wheeling the box while moving over folder icons. Fixed.
Code: Select all
v21.40.0118 - 2021-01-09 16:31
* Hover Box | Text Scrolling: Slightly changed the strategy. Now you can
fully scroll through texts up to a size of 64 KB, in larger texts you can
see the first 32 KB and the last 32 KB.
In the latter case Down, Up, PageDown, and PageUp can now cross the border
between the upper and the lower chunk.
% Hover Box | Scrolling: Now well visible on 4K screens.
Code: Select all
v21.40.0123 - 2021-01-11 22:01
+ Open Throw Away Clone: Added another little pro trick: Hold CTRL+SHIFT
while clicking the command to open a fully enabled (non-throw-away) clone
of the current window. This means it's identical to a Throw Away Clone,
but without READ-ONLY.
You can achieve the same as above using the following new scripting
command:
+ Scripting got a new command.
Name: NewWindow
Action: Opens a path in a new window.
Syntax: newwindow [path]
path path to open a new window (clone of the current window)
defaults to current path
Example:
newwindow; //open the current path a new window
newwindow "C:\"; //open C:\ a new window