mouse-down blow up enhancment
Re: mouse-down blow up enhancment
Yippee Yay - 2 !!!
This would apply to the left click MDBU (in full size when not fit to screen) it would be centered when you left clicked instead of being dependent on where you clicked the thumbnail.
In the right click MDBU when the pic is small (i.e., smaller than the screen) would the option center that image on the screen as well? Sounds good. I ask concerning the right click only because with a very small pic when you click the thumb, the mouse cursor would not be under the resultant blown up image in the center of the screen, but I don't see that as a problem. I have right click image stays-up when clicked. In any case it shouldn't be a problem since the blown up image will go away when you click again anywhere on the screen on or off the image.
This would apply to the left click MDBU (in full size when not fit to screen) it would be centered when you left clicked instead of being dependent on where you clicked the thumbnail.
In the right click MDBU when the pic is small (i.e., smaller than the screen) would the option center that image on the screen as well? Sounds good. I ask concerning the right click only because with a very small pic when you click the thumb, the mouse cursor would not be under the resultant blown up image in the center of the screen, but I don't see that as a problem. I have right click image stays-up when clicked. In any case it shouldn't be a problem since the blown up image will go away when you click again anywhere on the screen on or off the image.
Windows 11, 22H2 Build 22621.1555 at 100% 2560x1440
-
- Site Admin
- Posts: 60357
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: mouse-down blow up enhancment
Here you are, v14.40.0308, enjoy! This beta is really happening...
FAQ | XY News RSS | XY Twitter
Re: mouse-down blow up enhancment
FWIW, my suggestion would be, for small images, to show MDBU in same position as the File Info Tip, i.e. just below (or above, for bottom of list) and to right of mouse position, and for big images the same as now, i.e. centered.
[I didn't actually try v14.40.0308, but v14.40.0309 MDBU "centered" appears to have no effect?..nevermind--I see it]
[
Last edited by sfwood on 10 Sep 2014 09:39, edited 3 times in total.
Re: mouse-down blow up enhancment
Don, great MDBU update (v14.40.0309)! I noticed though when I have on right click "shrink to fit" selected and it's a small image, it is not centered, but exhibits the old behavior (i.e., blowing up at the source). By the way, this happens with a jpg thumbnail in thumbnail view or a file icon in a list format. When I un-select "shrink to fit", the small images are centered. From the beta notes it sounded like you intended them to be centered with both left and right click, knowing that if shrink to fit is selected the larger images (larger than the screen) are going to be centered anyway.
Conditions: With right-click MDBU, stay up selected, and the image file you right click on to perform MDBU is "not" selected. I noticed that when the small image is centered on the screen in MDBU and you click in the same place again (i.e., over the thumbnail) to end the MDBU, the file becomes "selected" which is something that never happened before (i.e., you could use MDBU forever clicking on the thumbnails but file selection was never changed). That second click to release MDBU probably shouldn't affect file selection.
Thanks
Conditions: With right-click MDBU, stay up selected, and the image file you right click on to perform MDBU is "not" selected. I noticed that when the small image is centered on the screen in MDBU and you click in the same place again (i.e., over the thumbnail) to end the MDBU, the file becomes "selected" which is something that never happened before (i.e., you could use MDBU forever clicking on the thumbnails but file selection was never changed). That second click to release MDBU probably shouldn't affect file selection.
Thanks
Last edited by klownboy on 10 Sep 2014 00:01, edited 1 time in total.
Windows 11, 22H2 Build 22621.1555 at 100% 2560x1440
Re: mouse-down blow up enhancment
I must be blind: where is the "Centered" option?
EDIT: solved, I was staring at the wrong config page
EDIT: solved, I was staring at the wrong config page
Tag Backup - SimpleUpdater - XYplorer Messenger - The Unofficial XYplorer Archive - Everything in XYplorer
Don sees all [cit. from viewtopic.php?p=124094#p124094]
Don sees all [cit. from viewtopic.php?p=124094#p124094]
-
- Site Admin
- Posts: 60357
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: mouse-down blow up enhancment
Confirmed and fixed.klownboy wrote:Don, great MDBU update (v14.40.0309)! I noticed though when I have on right click "shrink to fit" selected and it's a small image, it is not centered, but exhibits the old behavior (i.e., blowing up at the source). By the way, this happens with a jpg thumbnail in thumbnail view or a file icon in a list format. When I un-select "shrink to fit", the small images are centered. From the beta notes it sounded like you intended them to be centered with both left and right click, knowing that if shrink to fit is selected the larger images (larger than the screen) are going to be centered anyway.
Conditions: With right-click MDBU, stay up selected, and the image file you right click on to perform MDBU is "not" selected. I noticed that when the small image is centered on the screen in MDBU and you click in the same place again (i.e., over the thumbnail) to end the MDBU, the file becomes "selected" which is something that never happened before (i.e., you could use MDBU forever clicking on the thumbnails but file selection was never changed). That second click to release MDBU probably shouldn't affect file selection.
Thanks
FAQ | XY News RSS | XY Twitter
-
- Posts: 855
- Joined: 05 Oct 2011 13:15
Re: mouse-down blow up enhancment
It feeeeeeeeellls good!!!
Was definitely worth it...
Thank you very much!
Flux
Was definitely worth it...
Thank you very much!
Flux
• Scripts: Session Manager | SlideShow | Collection Manager | Power Launcher | Akelpad syntax highlighting | ...
Re: mouse-down blow up enhancment
Hi Don, I'm still having my second issue discussed above with a small image which is right clicked to stay up. When you can click the second time with a standard left click to release MDBU, it selects the file. I've also noticed in the same situation that if I right click (on the thumbnail) to release the MDBU instead of being released, it reactivates the MDBU. I've tried using very fast right and left clicks (since it is a timed event) and they still occurred as described. None of these issues occur when the blow up covers the initial thumbnail and you click either left or right to release MDBU. By the way, the right click is centered now. Thanks.
Windows 11, 22H2 Build 22621.1555 at 100% 2560x1440
Re: mouse-down blow up enhancment
Don, another MDBU detail:
As far as I can see, when in MDBU (while mouse button being depressed) one can move cursor only up to the screen borders. Would it be technically possible to eliminate that restriction. In that way large images could be shifted over screen more freely.
As far as I can see, when in MDBU (while mouse button being depressed) one can move cursor only up to the screen borders. Would it be technically possible to eliminate that restriction. In that way large images could be shifted over screen more freely.
Win 10 Pro 64bit
-
- Site Admin
- Posts: 60357
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: mouse-down blow up enhancment
Not possible (at least not easily).Borut wrote:Don, another MDBU detail:
As far as I can see, when in MDBU (while mouse button being depressed) one can move cursor only up to the screen borders. Would it be technically possible to eliminate that restriction. In that way large images could be shifted over screen more freely.
And I don't see where that could be a problem. How large is large?
FAQ | XY News RSS | XY Twitter
-
- Site Admin
- Posts: 60357
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: mouse-down blow up enhancment
I tested with an older version and cannot really find a difference. Seems like exptected behavior to me.klownboy wrote:Hi Don, I'm still having my second issue discussed above with a small image which is right clicked to stay up. When you can click the second time with a standard left click to release MDBU, it selects the file. I've also noticed in the same situation that if I right click (on the thumbnail) to release the MDBU instead of being released, it reactivates the MDBU. I've tried using very fast right and left clicks (since it is a timed event) and they still occurred as described. None of these issues occur when the blow up covers the initial thumbnail and you click either left or right to release MDBU. By the way, the right click is centered now. Thanks.
FAQ | XY News RSS | XY Twitter
Re: mouse-down blow up enhancment
I've got no problem with any of that Don, it seemed a bit odd though that a second right click on the thumbnail of a small image reactivated the blowup instead of releasing it (i.e., you have to move away from the thumbnail and click to release the blow up). I don't recall having to do that previously. If you left click on the thumbnail to release the blowup with the same small image, it selects the image file. Thanks.
Windows 11, 22H2 Build 22621.1555 at 100% 2560x1440
Re: mouse-down blow up enhancment
It is my understanding that MDBU with Loupe movement works by ensuring that the position of the mouse cursor on the thumbnail (reference) matches the position of the mouse cursor over the floating enlarged imageadmin wrote:Not possible (at least not easily).Borut wrote:Don, another MDBU detail:
As far as I can see, when in MDBU (while mouse button being depressed) one can move cursor only up to the screen borders. Would it be technically possible to eliminate that restriction. In that way large images could be shifted over screen more freely.
And I don't see where that could be a problem. How large is large?
Maybe you could manage that by:
-upon clicking, you you paint an invisible reference that fills the screen
-you place the mouse cursor at the center of the screen
-MDBU starts
In this way you can see every pixel of very large images staying withing the monitor borders with the cursor
Tag Backup - SimpleUpdater - XYplorer Messenger - The Unofficial XYplorer Archive - Everything in XYplorer
Don sees all [cit. from viewtopic.php?p=124094#p124094]
Don sees all [cit. from viewtopic.php?p=124094#p124094]
Re: mouse-down blow up enhancment
Amazing. MDBU got even more amazing! Now I just need to stop accidentally using it on extra large images that would end up crashing my video card...
@Marco
Yeah that pretty much what Loupe is.
@Marco
Yeah that pretty much what Loupe is.
Re: mouse-down blow up enhancment
Size for example starting from 10000 x 2400.admin wrote:Not possible (at least not easily).Borut wrote:Don, another MDBU detail:
As far as I can see, when in MDBU (while mouse button being depressed) one can move cursor only up to the screen borders. Would it be technically possible to eliminate that restriction. In that way large images could be shifted over screen more freely.
And I don't see where that could be a problem. How large is large?
I prefer using the MDBU movement type "Touch screen" and that is where I notice this restriction from time to time. When using the "Loupe" movement type this does not appear to be the case, so "Loupe" is now my workaround.
@Marco
Thanks for mentioning "Loupe" movement type!
Win 10 Pro 64bit