XYCopy refuses to exit. Multiple running copies. Can't be killed.
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
I make all updates of the portable version after closing XY
and never had any conflict or problem to update all files.
and never had any conflict or problem to update all files.
Windows 11 Home x64 Version 23H2 (OS Build 22631.3447)
Portable XYplorer (actual version, including betas)
Everything 1.5.0.1372a (x64), Everything Toolbar 1.3.3, Listary Pro 6.3.0.73
Portable XYplorer (actual version, including betas)
Everything 1.5.0.1372a (x64), Everything Toolbar 1.3.3, Listary Pro 6.3.0.73
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
I am not, upgrades are always performed during an idle state, not in the middle of file manipulation.
At my residence I have other screenshots showing a great number of XYcopy's in the background (I believe I've captured as many as 8-10).
I work with lots of UNC file transfers and occasionally notice glithches or issues (e.g. If you have many queued operations, and perform a delete operation, when it finishes deleting it will start the next action in the queue, despite the prior action being incomplete OR Under a UNC path, create a new folder, immediately hit F2 to rename that "New Folder" folder, XYplorer often crashes (I believe this is an race condition)). That UNC file work is the only thing I could come up with that many people may not run into.
In my experiences; I have never seen XYplorer.exe close XYcopy.exe (as the dev. you know better than I) but I am also unsure of a time when this would occur other than the update process (e.g. I can close XYplorer and XYcopy stays running when doing file operations).
-
- Site Admin
- Posts: 60585
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
Is "Delete [...]" ticked in Configuration | File Operations | File Operations | Background Processing | Apply to...?
FAQ | XY News RSS | XY Twitter
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
Yes, but by the notes Delete runs parallel. By my understanding Delete should not complete it's operation then trigger the next queued operation, correct?
https://i.imgur.com/jAntKdA.png
-
- Site Admin
- Posts: 60585
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
That's correct, and AFAIK this has been reported as bug (and has been fixed) in 2012: viewtopic.php?f=2&t=7599
A completed deletion only triggers the next job in the queue if there are no other queued jobs in progress at this point in time.
But I see a possible hole in the implementation now that I will fill in the next beta (v22.40.0202). Let me know if that makes any difference.
A completed deletion only triggers the next job in the queue if there are no other queued jobs in progress at this point in time.
But I see a possible hole in the implementation now that I will fill in the next beta (v22.40.0202). Let me know if that makes any difference.
FAQ | XY News RSS | XY Twitter
-
- Site Admin
- Posts: 60585
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
Can anybody confirm this?
FAQ | XY News RSS | XY Twitter
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
I apologize for being off-topic. If you prefer I can start a new post regarding this issue.
I also can't repeat it consistently, but it seems to occur when I'm "Moving Quickly" if that makes any sense (hence the belief it's a race condition).
I'll start recording when I'm doing some of that quick sorting work to see if I can't catch it.
The steps (more verbosely) that seem to cause the issue:
º Always in a UNC path (Can't recall if my mapped drives do it or not)
º In a directory:
- Create a new folder (I have a hotkey setup for this: Ctrl+N)
º As "New Folder" appears:
- Hit F2
º Occasionally I can get a letter or two of the name in, but XY crashes here.
º Re-start XY & browse to the folder
º It will still be named "New Folder"
- Regardless if I manage to type letters into the renaming, it always crashes before the renaming occurs. The folder is always named "New Folder" when XY restarts.
Last edited by Jeeves on 02 Nov 2021 17:55, edited 1 time in total.
-
- Site Admin
- Posts: 60585
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
How do you create a new folder? (Which command do you use?)
FAQ | XY News RSS | XY Twitter
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
Apologies, I was editing the comment above when you replied, does this process help?
The steps (more verbosely) that seem to cause the issue:
º Always in a UNC path (Can't recall if my mapped drives do it or not)
º In a directory:
- Create a new folder (I have a hotkey setup for this: Ctrl+N)
º As "New Folder" appears:
- Hit F2
º Occasionally I can get a letter or two of the name in, but XY crashes here.
º Re-start XY & browse to the folder
º It will still be named "New Folder"
- Regardless if I manage to type letters into the renaming, it always crashes before the renaming occurs. The folder is always named "New Folder" when XY restarts.
-
- Site Admin
- Posts: 60585
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
I'm surprised about the "Hit F2". It should enter rename mode by itself. No need for F2.
FAQ | XY News RSS | XY Twitter
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
I do not think this provides enough information (maybe the fault offset).
But XY Crashed (UNC, New Folder, Rename Crash) and this is what Event Viewer had to say;
But XY Crashed (UNC, New Folder, Rename Crash) and this is what Event Viewer had to say;
Windows Error ReportingFaulting application name: XYplorer.exe, version: 22.30.0.211, time stamp: 0x6176d170
Faulting module name: XYplorer.exe, version: 22.30.0.211, time stamp: 0x6176d170
Exception code: 0xc0000005
Fault offset: 0x0032feeb
Faulting process id: 0x5924
Faulting application start time: 0x01d7cf988b0387f0
Faulting application path: D:\Program Files (x86)\XYplorer\XYplorer.exe
Faulting module path: D:\Program Files (x86)\XYplorer\XYplorer.exe
Report Id:
Faulting package full name:
Faulting package-relative application ID:
andFault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: XYplorer.exe
P2: 22.30.0.211
P3: 6176d170
P4: OLEAUT32.DLL
P5: 10.0.19041.985
P6: fc8f0d5b
P7: c0000005
P8: 0001d270
P9:
P10:
Fault bucket , type 0
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: XYplorer.exe
P2: 22.30.0.211
P3: 6176d170
P4: XYplorer.exe
P5: 22.30.0.211
P6: 6176d170
P7: c0000005
P8: 0032feeb
P9:
P10:
-
- Site Admin
- Posts: 60585
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
Thanks, but does not help. I need the steps to reproduce it.
What about the other problem? Still got XYcopy processes hanging around since v22.40.0202?
What about the other problem? Still got XYcopy processes hanging around since v22.40.0202?
FAQ | XY News RSS | XY Twitter
-
- Site Admin
- Posts: 60585
- Joined: 22 May 2004 16:48
- Location: Win8.1 @100%, Win10 @100%
- Contact:
Re: XYCopy refuses to exit. Multiple running copies. Can't be killed.
Do you see anything in the debug log? Use this script to show the log:
Code: Select all
dlog;
FAQ | XY News RSS | XY Twitter